Conversations
Is there a way to configure a CW key to work on a laptop using SmartSDR ? Is there anyway to work work CW using SmartSDR? 73 Bill
Bit cable
I got an FTDI C232HM-EDHSL-0 cable and I have two problems with 6500 , SSDR last version. 1 - It works very well as BCD, selecting Bit c...
10 Mhz
I connected my 6500 to a gps receiver with 10Mhz output. I see the peak on 28 Mhz panadapter at 10 Mhz but how can I be sure that the 650...
Anyone get SmartSDR V1.10 Serial Cable to work with ACOM 600S?
I have the new Flex USB serial cable connected to the RS232 connector on the back of the ACOM 600S. The Flex USB settings are set to CAT,...
How to connect Flex-6700 directly to the amplifier ACOM-600S?
How to connect the control of Flex-6700 directly to the amplifier ACOM-600S. Does anyone have experience or idea how to connect these dev...
Flex 6500 and Acom 600s
I tried with Ddutil, SmartSDR and Omnirig but I can't get communication between 6500 and Acom 600s through RS232. Quite sure it's a probl...
FLEX 1550 - 3000 + 2m transverter
I have a Yaesu 991 for VHF contesting, really a good radio on 2m, equivalent to a 275 Icom. I wish to improve using a transverter+sdr. I ...
6500 power
The power meter on my 6500 shows a maximum of 85W. I checked with LS2K4 Wattmeter that is a little bit more accurate than a bird and tha ...
How to properly use WNB?
I cant seem to get the WNB working at all. It has made little to no difference meanwhile my FTDX3000 can block this noise out like its n...
transverter
http://transverters-store.com/144mhz.htm I'm thinking of ordering this tranverter. I'd like it to cover full 144-148 2M band. Vendor say...
Radiosport headset for Flex 6k? OEM or copy?
Guys, I like the look of the Radiosport headset so starting shopping around for one. I then stumbled on these on ebay for £74 instead ...
Your opinion on SW
Hi everyone, I' new here and I kindly ask your opinion as I just sold my FTDX-5000 in order to cross the bridge and use sdr technology. I...