Conversations

Conversations 1 - 20 of 332
Photo of KY6LA - Howard
Remote control web server for SmartLink
I have been operating remote for years using VPN and various Remote Desktop solutions Now tha SmartLink is almost a reality it's time...
  • 7 me toos
  • 17 replies
  • Idea
Photo of Ian VA3QT
6600/RMS Express Set-up Advice
I've been going around in a circle for over a week unsuccessfully trying to get RMS Express to talk to SmartSDR on a new FLEX 6600.  The ...
  • 1 me too
  • 5 replies
  • Problem
Photo of HCampbell  WB4IVF
S-Meter Accuracy of FLex and Others - Rob Sherwood
With all the recent (and not so recent) posts on the FlexS-meter and its calibration, you might find Rob’s take on the subject interestin...
  • 3 me toos
  • 26 replies
  • Praise
Photo of Al / NN4ZZ
CW Filter Widths in the "RX Display Tab" -- 250 is missing
I think most CW operators primarily use the narrow filters widths between 50 and 250.  There are 8 to choose from in the "slice display" ...
  • 10 me toos
  • 12 replies
  • Idea
Photo of Greg
CW sidetone
Does anyone have any idea when the CW sidetone will be available to monitor via DAX so it can be monitored remotely? 73 Greg AB7R
  • 4 me toos
  • 7 replies
  • Question
Photo of Ken W6XB
No N1MM CWX local side tone
I am using SmartSDR V2.2.8 in conjunction with N1MM.  The Flex CWX works great with local CW side tone.  However, when using N1MM with th...
  • 5 me toos
  • 7 replies
  • Question
Photo of David Decoons wo2x
Customize RX filters (right click & configure)
Hi All,I was talking to the guys from Flex this weekend at the ARRL Centennial convention the subject was brought up about future ability...
  • 39 me toos
  • 27 replies
  • Idea
Photo of Gene - K3GC
Noise
For the past week I have been getting sporadic noise on 17 and 20 meters (20 The worst).  It lasts anywhere from a few minutes to an hour...
  • 1 me too
  • 8 replies
  • Problem
Photo of Jeremy Gilbert KC1JZE
Why does the Flex 6600 need band preselectors?
I’m loving my 6600 - an incredible instrument! As I dig deeper and deeper into the documentation and try to learn the art of SDR signal ...
  • 1 me too
  • 14 replies
  • Question
  • Answered
Photo of K1ESE
Smartlink, N1MM+ and CW
I have several setup questions about using SmartLink with N1MM+ and CW in a contest.  Assume a Flex 6500 at a remote site with big ante...
  • 1 me too
  • 2 replies
  • Question
Photo of Rex K0KP
Give us a Choice with the S Meter
Flex S Meter - I'm sure there are many users that would appreciate the ability to have the S meter work as it does in a traditional analo...
  • 3 me toos
  • 38 replies
  • Idea
  • Not Planned
Photo of Tom W3FRG
Power Pole connectors
Each time I slide my 6600M forward a few inches the power Pole Connectors both fall out of their socket. They were inserted to their max,...
  • 1 me too
  • 22 replies
  • Question
  • Answered
Photo of Stan - VA7NF
Controls for the blind or visually busy user
In our radio club we have two blind operators.  One uses a screen reader (JAWS) that keys in on tags assigned to input boxes.  This quest...
  • 1 me too
  • 4 replies
  • Question
Photo of William Hemmingsen
Android App
I started working on a Android App to go alongside my CMD micro.  I wanted a few additional feature at hands reach without having to use ...
  • 15 me toos
  • 74 replies
  • Idea
  • Not Planned
Photo of Ed N5DG
Newbie question , Looks like I QRM second slice ?
I have slice A on 50,098 CW and slice B on 50.313 FT8 . When I tune or use the paddle on Slice A , I see spikes or interference on slice ...
  • 1 me too
  • 8 replies
  • Question
Photo of Roy Laufer
SmartSDR 2.3.7 - It's Deja Vu All Over again, and again...
We gotta stop meeting like this... Well, I didn't see any problems mentioned with 2.3.7, so I took it for "a spin"... Guess what? I ge...
  • 1 me too
  • 23 replies
  • Problem
  • Acknowledged
Photo of Ray DeVreugd
Using 2 Astron 25 Amp Power Supplys to Power 6700
Would like to use 2 25 amp Astron Power Supplies in parallel to power the 6700. I have noticed when running FT8 at about 80 watts with th...
  • 1 me too
  • 10 replies
  • Question
Photo of Stan - VA7NF
maestro needs a power LED
There is a significant delay between pressing the power button, mainly to turn it on but also on power off, such that the user does not k...
  • 2 me toos
  • 4 replies
  • Idea
Photo of Stan - VA7NF
maestro slow response on panadapter zoom
V2.3.7 Maestro connected to 6600 via local 100bT (lightly loaded HP 24 port) switch.  It takes up to 10 seconds for multiple panadapter z...
  • Stan - VA7NF, 4 months ago

  • 1 me too
  • 0 replies
  • Problem
Photo of Amlan - AI6XN
A conversation needed pre purchase
I am moving into Flex 6600M from being an avid ICOM 7610 user and I feel for people like us, the first time converts to flex,there should...
  • 2 me toos
  • 11 replies
  • Idea