Conversations

Conversations 21 - 40 of 71
Photo of Ross Biggar
Smartlink praise.
With help from a local PC company, sorting out the problem with our router, I am now operating Smartlink, congratulations to FRS it works...
  • 2 me toos
  • 3 replies
  • Praise
Photo of Ross Biggar
2 Licences ???
I have  6700 and a 6500, version 2 setup perfectly on the 6700, but on the 6500 the software is asking me to "buy".  So do I need to pay ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Bill  /  VA3QB
Flexmeter File
I was wondering if anyone has a copy of the file "Flexmeter.exe"  written by W3XY?   I saw it used in a video ( https://www.youtube.com/w...
  • 2 me toos
  • 11 replies
  • Question
  • Answered
Photo of Ross Biggar
Praise for service
I want to thank FlexRadio for the prompt servicing of my 6700. I sent it back for an intermittent fault in May that unfortunately the Aus...
  • 3 me toos
  • 1 reply
  • Praise
Photo of Ross Biggar
Radios wont tune when using RTTY
I have 2 FRS radios a 6500 and a 6700. I was just checking them both a couple of hours before the SARTG RTTY contest today. A major probl...
  • 1 me too
  • 2 replies
  • Question
Photo of Stefano - W2WTZ
6500 power
The power meter on my 6500 shows a maximum of 85W. I checked with LS2K4 Wattmeter that is a little bit more accurate than a bird and tha ...
  • 6 me toos
  • 52 replies
  • Question
  • Answered
Photo of Ross Biggar
Power problem solved
I would like to thank all of those who commented and gave advice on the lack of output power from the radios. Especially the comment that...
  • 1 me too
  • 2 replies
  • Praise
Photo of Ross Biggar
1.8.4 distortion Query
For the past 3 or 4 weeks I have been working ssb into the US using my 6500 with reports of very good audio and not had any problems with...
  • 1 me too
  • 2 replies
  • Question
Photo of Ross Biggar
Contest logging on SSB IARU
A question for the contesters, I operated in the IARU contest (it was hard work from down here with condx marginal and most signals in th...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Ross Biggar
Maestro and digital for dummies
It seems that Maestro is primarily aimed at the CW/SSB interest. But I would like to run digital modes, which my 6700 and 6500 with Sm...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Ross Biggar
connecting to a lan
I have a 6500 and a 6700 each running to a different computer,  but My 6700 has to go back to Flex for service, with 2 problems freq shif...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Ross Biggar
DDUTIL and an ACOM 2KA
After being off the air for  a few months I am trying to get my ACOM 2KA working with the 6700 and DDUTIL. I have enabled all the tx on r...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Simon Lewis
Maestro shipping?
Are we going to see maestro soon?? Its just over 4 weeks to Christmas .. and shipping to NZ will take 7-10 days so running out of time ...
  • 2 me toos
  • 11 replies
  • Question
  • Answered
Photo of Ross Biggar
12 meter problem
I would like to try 12m but every time I set up a slice on 12m, the slice jumps to 50mhz, so I don't have a slice on 12m. What will cause...
  • 1 me too
  • 7 replies
  • Problem
Photo of Ross Biggar
Acom2000A or SPE 2K A
This is not really a question. I wish to thank all of you who replied to my question about the Acom 2000A or the SPE 2KA . Interestingly ...
  • 1 me too
  • 8 replies
  • Question