Conversations
I have been running SmartSDR 1,3,8 for some time with no problems. I have been trying to get 3rd party programs (Logger 32, FLDIGI) to c...
I installed SmartSDR 1.2.1 on a windows 7 pc. I am not a fan of waterfall displays so I pulled down the spectrum display for each slice ...
I just wanted to pass along a problem I ran into in updating to 1.2.1 this morning. I was able to update the firmware however, all panad...
I just installed Smart Cat for the first time and started the program. It found my 6500 and assigned a 3rd party port to com 6. I then...
In early releases of software, I was able to move the frequency of the slice receiver by highlighting the frequency box in blue and type ...
I tried the AM mode after installing 15.13 with wonderful results. The only problem is that when I transmit in AM, the monitor function ...
I am running release 15.13. When I have first receiver set up and bring on the second slice and I switch the active TX to that second s...
The front panel microphone recepticle threads do not mate with the supplied hand mike. It appears that the recepticle threads are a bit ...
Is anyone using a PR20 with the 6500. If so, what settings are you using