Driving KPA500 with 2W for digital work?
So I've had a KPA500 up and running for a few weeks now. I do a fair amount of digital work, and was thinking to myself... Instead of by...
Rob Fissel
Joined on March 1, 2015
48
Likes received
14
Conversations posted
256
Replies posted
127
Conversations followed
Conversations
Conversations 101 - 120 of 124
A TCP Server for DDUtil
DDUtil v3 has a new feature in development, a TCP/IP server which allows control of the main DDUtil program from another IP address on yo...
Flex 6300 loosing its connection to my Windows 8.1 computer using Wifi
I am having a problem with my Flex 6300 loosing its connection to my Windows 8.1 computer. I am using Wifi but I am only 8 feet away from...
Looking for advice on equipment for first ham shack
I just got my license and am planning my first ham shack. I would appreciate any advice ya'll can offer a newbie. After a lot of resear...
Return policy
Iit true flex has a 30 day return policy if you aren't satisfied with sdr? If so what is the policy?
Selling a 6300
I purchased a 6700 at Dayton. Now that I'm satisfied with the new radio, my 6300, purchased new from Flex in October 2014 is surplus. Ev...
Can anyone direct me to information on how to select antennas on the 6500 ?
I have a 6500. I would like to use one antenna on ANT 1 on one panadapter. I would like to use another antenna on ANT2 with another panad...
Will Maestro be able to control a 6500 over a 4G Verizon wireless network into a hot-spot connected to a router?
I recently overheard a conversation on the air that a wireless 4G network could not be used for radio control, as in using a Maestro over...
FreeDV on Smart SDR 1.4.11
The Waveform installer is available here: http://www.flexradio.com/downloads/freedv_waveform_installer-msi/ I installed the file. A FDV...
How much power should I use when running FDV?
How much power should I use when running FDV? Do I just need to keep an eye on the temperature of the transmitter?
Initial Binaural Audio Impressions
I was wondering on other users impression of the new 1.4.3 binaural audio feature. I used a similar feature on the Elecraft KX3 and I lo...
good remote headsets
can someone recommend a good sounding comfortable headset to use with my laptop when I am working remote ? I had a logitech gaming headse...
Brand new 6300 fan very loud
I have just tonight set up my brand new 6300 but despite never even transmitting the internal fan is very loud! Is there a setting or iss...
30 meter Lockups
6500 locks locks up on on 30 meters when on lan only.
No problems until I switched from direct pc connection via extra nic card to the...
Beverage Antenna RF Overload?
Decided to give a beverage antenna a try. Seven hundred feet of wire, ground rod on far end, capacitor but don't remember the value. Us...
SMART SDR LAN remote working well over PPTP VPN
Smart SDR 1.4 has been optimized so well that I am running it with solid connection from the office via a PPTP virtual private network to...
Remote on 1.4.3 radio hangs
While operating with the new remote feature on a MacBook Pro wirelessly the pan adapter and water fall and all audio will stop. I close ...
Antenna Evaluations
I know this is somewhat off topic, and I don't want to start a big debate, but some of you contesting and DX antenna experts might give m...
WSJT-X 1.4 RC4 is out, config probs
Having the same problem as George here https://community.flexradio.com/flexradio/topics/wsjt-x-1-4-and-6000-control. Has anybody had any ...
Quiet Computer Recommendations?
I plan to build a new desktop PC (“tower”). I’ve read all of the minimum requirements for
SSDR, plus other recommendations, so my path ...