WSJT-X not decoding. I am seeing signals in the WSJT-X waterfall; clock seems accurate
WSJT-X not decoding. I am seeing signals in the WSJT-X waterfall; I can send CQ and getting RF out; the clock seems to be within 0.2 secs...
Rick Hadley - W0FG
Joined on December 13, 2013
120
Likes received
49
Conversations posted
530
Replies posted
448
Conversations followed
Conversations
Conversations 1 - 20 of 444
Show Us Your FlexRadio In Your Shack
I thought it might be fun to have us Flex users show a picture of their FlexRadio in
their shack.
Here is my 6600M in
my shack. It's i...
New CW Skimmer v2.1 and SDR-Bridge v1.6.4
Initial testing of SDR-Bridge v1.6.4 with the new v2.1 of CW Skimmer looks good. Let me know of any issues either here or at the web site...
Give us a Choice with the S Meter
Flex S Meter - I'm sure there are many users that would appreciate the ability to have the S meter work as it does in a traditional analo...
Newbie to Flex-1500 - No RX...
Just bought a second hand Flex-1500 but I don't have any RX at all... "PA" is of course selected in "Antenna" but what other(s) parameter...
Slice Master 6000 v0.10.5 is now available
As many of you have already noticed, Slice Master 6000 now supports placing cluster spots into the SSDR panafall via the recently enhance...
Welcome Neal K3NC as the newest member of the FlexRadio team
I’d like to take this opportunity to welcome Neal Campbell, K3NC as our newest FlexRadio employee. Neal was an original SDR-1000 owner a...
Most Common Fix for DAX Driver errors in Windows Spring Update (1803) (You can do this!)
As we continue to see high ticket rates related to the Windows Spring Update (often referred to as 1803), we can better recommend actions...
Windows Gremlins - Alternatives?
Since purchasing my Flex 6400 I have spent just about as much time chasing Windows-related gremlins than I have using the radio. I'm gett...
SDR settings for SPE 1.3K amplifier
I want to connect my new SPE expert 1.3K to my Flex 6500. I have already Dan's (KC5PCB) cable set. Can someone tell me what i have to cha...
Can't fine CWX in SSDR
I've looked in the manual for CWX but I have overlooked it somehow , The user guide I downloaded is for the 6600M and the 6400M , My radi...
Announcement - Replay of 7/15/2018, Sunday's Flex Net.
Replay of Sunday's Flex Net is available on my channel - WA5QPZ - or this link https://youtu.be/J5OdsLHA7ml This was as what was ...
Multi Slice Operation
Hi All, I've been trying to get my head around some of the multi-slice options available, and have a couple of questions the manual and ...
I know that there is diagnostics that can be displayed on the 6500 led screen. Is there anywhere that gives a comprensive list of the codes?
I know that there is diagnostics that can be displayed on the 6500 led screen. Is there anywhere that gives a comprensive list of the codes?
Problem w/Slicemaster 10.5d and WSJT-X
I am finding that when using Slicemaster 0.10.5d with WSJT-X that it periodically introduces a "hiccup" into my FT8 transmitted signal. ...
Connect Flex 6600 to SBE expert 1.3k amp with 6600
Flex 6600 upgraded to latest SDR version without problems. Trying to interface with my SBE Expert 1.3K amplifier. Connected FTDI USB S...
CW Skimmer
What are the correct settings to get CW Skimmer version 2 working properly with DAX IQ? Is it really necessary to use it in combination ...
A conversation needed pre purchase
I am moving into Flex 6600M from being an avid ICOM 7610 user and I feel for people like us, the first time converts to flex,there should...
CW Skimmer Access Violation
I get this message when starting CW Skimmer Ver 2 with either Slice Master or SDR-Bridge: Access violation at address 0051AC29 in module ...
FLEX CONTROL by K6TD/K6TU
Since taking delivery of my FLEX 6400m my Flex Control has been sitting on my desk unused. I've adjusted well not using the control but I...