Speaker Connection?
OK, I'm new (taking delivery of the 6300 in two days). I apologize for my ignorance. Trying to understand (yes, simple) speaker connecti...
np2g
Joined on July 3, 2014
30
Likes received
9
Conversations posted
262
Replies posted
103
Conversations followed
Conversations
Conversations 41 - 60 of 104
Another one month to brew expectation for v1.4
According to the today's Insider, we can enjoy another one month to dream new features and bug fixes of v1.4. I hope we would not have an...
_large.jpg)
Using a D-104 with the 6300
I wired up a D-104 to my Flex 6300. The PTT keys up right away but audio is not accepted for 1.5 seconds both on AM and SSB
On SSB you ...
Monitor Gain
Once I have my 6500 audio set to the point that it sounds good (on air reports) I can no longer hear myself in my headset. If I increase ...
Transmitting+SSB+while+in+the+Digital+mode
I operate in multi-mode nets where it is necessary to transmit both digital modes and ssb. We could use ssb while in digital with the 500...
+20 dB boost and TX EQ on by default - should be off
I did a database reset today and of course the +20 dB boost and TX EQ were on by default. I feel these should be off by default. Comment...
Expert 2K-FA amplifier with Flex-6700?
I am very close to ordering this amplifier to use with my Flex-6000 radios. I am presently using an Elecraft KPA500 with the KAT tuner. I...
flex-6300 & dm780
Hi all, been configuring my new flex 6300 to DM-780 using DAX, everything works as it should with the exception of the power output level...
stop waterfall, link dm780 and colbook probleme, ddutil or minideluxe ?
I have the stop of the waterfall, link dm780 with calbook and cluster it would come from DDutil, I would like to know if while using Min...
RF on 6300 powered speaker output?
Is anyone else experiencing the issue of RF on the 6300's powered speaker output? Using a Bird dummy load and Mix 31 beads on all coax a...
Using digital modes with the 6300
Are software upgrades for direct use of digital modes planned? I have been told that direct use for RTTY and PSK 31 are in the planning ...
Problem using CWX and paddle
After sending a memory using CWX, and then using a paddle (internal keyer) to provide a fill or missed information the first element sent...
QRP mode?
How can I lower the power below 1W? QRP isn't much of a challenge when WSPR is still doing >5000 miles on 1 watt into a mag-loop sittin...
W2IHY 8 Band EQ and W2IHY EQ Plus
I am currently using a K3 with the W2IHY 8 Band EQ and W2IHY EQ Plus, and I get excellent on air audio reports. I
will be purchasing t...
_large.jpg)
Flex 6300 or 6500
Excuse me if this is a dupe. I am within a week of ordering either a 6300 or 6500. I'm a casual operator age 63 who finds a 5000 much e...
Dax "stuttering" since 1.3.8 SSDR install
Since updating to 1.3.8 I am experiencing some "Stuttering" in Dax RX that seems intermittent and perhaps related to throughput in the ne...
FlexLib AGC-T values in dBm
Some time ago I wrote a program for PowerSDR CAT to automatically set AGC-T just above the noise floor. In PowerSDR the AGC-T value seeme...
Tuning amp.. tools for the serious flex contester
It would be great in Smart SDR if there was a button to pass the tune power level to the actual drive power level on demand. Say you are...
6500 filers?
Good day
There is a feature on the 3xxx/5xxx (PowerSDR client) series of radios, that facilitates efficient RTTY contest operation, i...
SmartCAT V 1,3,0.0 COM PORT & HRD anomaly question
Setting up SmartSDR V 1.3.0.0. with HRD V 6.2.76.297. OS Windos 7 Ultimate 64 bit. Once set up, HRD Rig Control and HRD Logbook work we...