Windows 7 Brick update
There is a Windows 7 update that can cause disruption for some users, beware!https://borncity.com/win/2019/01/10/update-kb971033-bricks-w...
Neal Pollack, N6YFM
Joined on January 29, 2018
137
Likes received
19
Conversations posted
241
Replies posted
132
Conversations followed
Conversations
Conversations 61 - 80 of 130
Flex 6400+Maestro configuring for WSJT-X...further questions
So I thought I had DX Labs, WSJT-X, SmartSDR, DAX, and CAT all configured correctly...but something not working right. The "DB scale" on...
Update
We need some kind of update, the last one was September 28th, 2018.
WSJT-X vs. HamLib vs. Flex-66xx or TS-2000 ??
Question: Every tutorial I have found and read on this site, and on the internet, say to selectrig type "Kenwood TS-2000" is the WSJT-X...
Legal Limit Solid State Amp - SPE 2K-FA, KPA-1500 or ??
Looking at solid state legal limit amps with integrated tuner for use with 6700. The SPE 2K-FA and recently introduced Elecraft KPA-1500 ...
How do I: WSJTX N1MM ARRL RTTY RU
January 5 is the ARRL RTTY Round Up permitting FT-8 this year. I am seeing a lot of discussion about using N1MM+ with it's new WSJT-X dec...
WSJT-X Advantages of Setting up multiple instances each with unique panadapters and Slice?
I have read several posts that recommend setting up WSJT with a different configuration file for each band where each configuration has i...
Ho Do I Configure: Demi L144-28 xverter and Flex 6600
I have a Flex 6600. I just received a Demi Q5 Transverter, L144-28 2 meter unit. I have IF drive level: 0 to +20 dBm Common IF. Commo...
windows 10 update vs. DAX, new problem, crash
I am running windows 10 Pro, 64 bit, and SmartSDR 2.4.9.This week's Windows 10 Update caused DAX failure yet again, just after I fixed it...
FT8 Maestro FT8
Is there a guide to setting up the Maestro with FT8? I have FT8 with WSJT-X working on my desktop computer. How do I set up the Maestro...
Is there a "How to" article on wiring the accessory connector for AFSK RTTY
I think the title says it all, but would be interested in a step by step on setting up the Flex for RTTY including which pins on the acce...
Flex 6xxx monitoring audio over remote
Hi I have a newly acquired 6300 and have it set up running WSJT-X in FT8 mode. All works okay but I cannot fathom out how to monitor audi...
Voltage at the Radio vs Voltage in the Radio (as reported via API)
Hello, I don't get 100W out on most bands into several
different power meters into a few different dummy loads--all tried
separately...
In Digi Modes ALC in Yellow?
New user with question regarding ALC meter. Have noticed when getting Fldigi working that when transmitting the ALC meter is in the yello...
Flex 6600 & Fldigi
Still a new 6600 user trying to work my way thru getting various programs running. My latest project is Fldigi. So far am receiving fine ...
FLEX 6600M Receiver Test Data
WHY FlexRadio posted thith --https://www.flexradio.com/flex-6600/>155 dB Dynamic Range115 dB 2kHz RMDRBUT i seehttp://www.sherweng.com/t...
Give us a Choice with the S Meter
Flex S Meter - I'm sure there are many users that would appreciate the ability to have the S meter work as it does in a traditional analo...
DAX Driver Error after Windows Update
Yesterday, I received notice of a pending Windows 10 Update. After the infamous Windows 1809? update, I had to roll my machine backwards...
Ease of Operation
With the recent release of WSJT-x 2.0 betas, it has been handy to have one instance running with the new FT8 protocol and a second with t...
How loud is the 6600?
Hello, being a Flex-6500 user, I'ld like to upgrade for a 6600 BUT before I do this, I'ld like to know about the fan-noise from the 6600....