Anyone seeing strange ATU operation in v3?
ATU operation in v3 is strange.
My 6700’s ATU operation is quite strange, since upgrading to v3.
Setup:
Flex6700, Limited Editi...
WA6FXT Mike
Joined on August 4, 2013
40
Likes received
41
Conversations posted
182
Replies posted
141
Conversations followed
Conversations
Conversations 1 - 20 of 41
Does anyone at FRS have an idea when Dual SCU Diversity will be available?
One of the reasons I bought the 6700 over the 6500 was the dual SCU’s and the diversity mode displayed in PowerSDR on the Flex5000 (w/dua...
After registering a second radio, Smartlink fails to connect
After registering a second radio, Smartlink fails to connect to either radio.
Both radios are running v2.4.9
Both radios are 6700’s
...
Smartlink does not see my Flex6700 anymore
Smartlink (SSDR v2.1.3x) does not see my Flex6700 anymore. It's been awhile, but I tried SmartSDR remote and could not see my radio. I wa...
Is anybody else having trouble logging in with SmartLink?
Smartlink errors and expiration date/times the same as the login date/time
Mike
V2.0.19 connection fails and automatic retries fail
From time to time, when I try to connect to my 6700 (v2.0.19) from SSDR, Maestro or iOS the initial display (SSDR screen is displayed, t...
Any update on when TNF creation will be available on the Maestro?
I was hoping that my Maestro would have TNF creation, by now.
SmartSDR for iOS has it (When v2.2.2 is released by Apple) already
Can't get TNF to work in iOS
I can't create a TNF in SSDR for iOS. Global TNF is on, 6700 v2.0.19, SSDR for iOS v2.2.1:0.52 D1.25. iPad Air v10.3.3
Neither +TNF bu...
Can an Ethernet connection in the mic1 plug damage the Maestro?
My M-Mic1 port no longer works. I'm wondering if plugging in an active Ethernet cable into the M-Mic1 can damage the unit?
Front Panel Display... An Idea!
How about some radio 'status' information on that neat front panel display.
1. GPS information (Same data, or as much as will fit) ava...
Where is the "DIV" (Diversity) button?
What happened to the DIV button? The 1.6.17 users guide still describes "diversity"; although, the DIV button does not show up on my 6700.
SSDR v1.4.16 - Export does *NOT* save memory settings
My Flex6700 running SSDR 1.4.16 does not save new memory settings until after I have exited and restarted SSDR. Is this normal? It seems ...
Flex6700 - Lost Audio, Slices then radio after running ok with v1.4.16
Flex6700 - Lost Audio, Slices then radio after running ok with v1.4.16, for a few hours.Very strange - After updating to v1.4.16, everyth...
Has anyone, found the Waveform API?
I'm looking for the Waveform API. I found, downloaded, built and tested the SmartSDR API (FlexLib.dll); now, I'm looking to do some Wavef...
Can we work full-duplex (Satellite mode) with DEMO LDPA on 2mtr and a 70cm/10m Tranverter?
I'm looking to do Satellite work using my 6700, if I can. I have a 144MHz Low Drive Power Amp (LDPA) w/Rx Pre-Amp designed by Down East M...
CWX with Break-In turned off still unkeys between characters. Is this normal?
See the title!
Any word / update on the recall?
Just wondering if anyone has received their recall email? My Special Edition 6700 (Purchase date 5/31/12) has not yet been recalled.
Is it time to revisit the on-board USB ports?
Now that APIs are being released, maybe a set of 'common' USB peripherals (serial ports, GPIO ports, audio devices) can be controlled via...
No RF output with DAX in v1.2.1
When I try to TX using DM780 (6.2) or MixW, I see what looks like audio on DAX Control, Transmitter keys; but, no RF. Tried USB and DIGU....
Has anyone tried Remote operation, since DAX is available?
Now that DAX is running, I'm trying to run audio via the computer (AKA: Remote operation) within my local network, not the Internet. Just...