Conversations

Conversations 1 - 20 of 23
Photo of Gerald - K5SDR
Official Position on Adaptive Predistortion
Periodically the topic of Adaptive Predistortion comes up for discussion on this community.  Our team has been consistent in our position...
  • 15 me toos
  • 35 replies
  • Idea
Photo of Tim K9WX
AGC Slope
I’m two weeks and 500 QSOs into my Flex 6600 with a Maestro.  Most of those QSOs are CW with some FT8 and RTTY. I have a number of q...
  • 2 me toos
  • 6 replies
  • Question
  • Answered
Photo of Rick, K7FYI
Flex Down! (6300 - Fan)
Just reporting in that I too am apparently having fan issues with my 6300. I've read up on the issue and know my options (i.e. Help Desk ...
  • 1 me too
  • 9 replies
  • Problem
  • In Progress
Photo of Rick  WN2C
How do I get audio from the radio to the PC without using the ethernet connection?
I would like to connect speakers (Klipsch Promedia 2.1) to the computer but still use them for the audio from the flex. I am guessing tha...
  • 1 me too
  • 6 replies
  • Question
Photo of Mark  K1LSB
My 6300 is overheating
My 6300 (running SSDR v2.2.8) has come up with an Overheat alarm in FRStack twice over the last 24 hours, once on 80 meters and once on 4...
  • 1 me too
  • 2 replies
  • Problem
Photo of N3CHW
front end desensed or overdriven
front end descended or over driven by large adjacent signals when noise reduction is set at max
  • 1 me too
  • 4 replies
  • Problem
  • Not a Problem
Photo of Dave
Number of memory channels for ATU
Did not see anything in the software manual about how many ATU memory channels are available. Is it open ended or is there a maximum numb...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Wayne
The question is always asked why would anyone want an sdr with knobs.
I think the answer is plainly obvious to anyone and its proven time and time again! Its Microsoft Windows ... Im so happy I got the 6400M...
  • 2 me toos
  • 26 replies
  • Question
  • Answered
Photo of Steve
PC Audio latency and noise
As anyone noticed any latency or some digital noise (clicks) when selecting PC audio to run Flex audio to PC speaker or PC headphones. I ...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Al Reeves
FT8 setup with Flex 6300
I have my Flex 6300 setup with the latest version of Ham Radio Deluxe (HRD) to operate and log digital modes (PSK, RTTY etc.).  The setup...
  • 6 me toos
  • 6 replies
  • Question
  • Answered
Photo of Graham - KE9H
Why does my S-Meter read S5 all the time?
We get a lot of questions about why the S-Meter always reads some constant level, like S5 on a particular band, for the noise floor, with...
  • 8 me toos
  • 28 replies
  • Question
  • Answered
Photo of Thomas NE7X
Noise Spikes on 40 meters
I am having a noise spike issue only on 40 meters with my new 6400M. When I first tune it on from a cold start, the receiver is good, no ...
  • 1 me too
  • 20 replies
  • Question
  • Answered
Photo of Mark  K1LSB
Mic volume slider doesn't work if ACC is selected as the Mic input.
The ACC port on the rear panel (specifically  pin #1, the Line In tap) is the only option available on a 6300 to capture the Line Out aud...
  • 1 me too
  • 2 replies
  • Problem
  • Not a Problem
Photo of Jim Osterling
Win 10 or win 7?
New to the Flex system. Have recently ordered the 6600 and shipping is in the April timeframe. I'm getting ready by reading the forum to ...
  • 1 me too
  • 27 replies
  • Question
Photo of Mark  K1LSB
External PTT doesn't allow PC Mic audio through to TX
On my brand-new-to-me 6300, I'm trying to transmit using an old Shure 520SL "Dispatcher" mic that's plugged into the mic input on my PC. ...
  • 1 me too
  • 4 replies
  • Question
Photo of Mark  K1LSB
New Feature Request - Selectable PTT Action
Please add an option to allow the PTT to stream the audio from whatever mic is selected, even if the selected mic is coming from a PC (wh...
  • 4 me toos
  • 10 replies
  • Idea
Photo of Dudley - WA5QPZ
No Flex Net Today
No Flex Net due to contest!    And next weekend is start of Daylight savings,   remember that the Flex Net meets or tries to meet every w...
  • 1 me too
  • 7 replies
  • Idea
Photo of K5ROX
Shipping outlook.....
Please only answer if you work with or for Flex. Ok batch 1 is being shipped now.... is there an rough guess to what order dates it will...
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Gopro
New Sherwood 6700 and 6300 tests - 9 MONTH LATER
Hi everyone, It was stated before 9 month: Ween Rob returns from his vacation, I will send him the unmodified FLEX-6300 he was testing.  ...
  • 2 me toos
  • 17 replies
  • Question
Photo of EA4GLI - 8P9EH - Salvador
Software updates ETAs
Happy new year to all. I hope 2018 brings happiness and health to all of you. On January 24th, 2018 we will reach 6 months since the ava...
  • 1 me too
  • 11 replies
  • Question
  • Answered