Conversations

Conversations 1 - 20 of 80
Photo of Mike Peron
HRD not properly keying Flex 6600M to Transmit
This is my first post after receiving my new Flex 6600M about one month ago. I have started integration of third-party software (e.g. H...
  • 1 me too
  • 4 replies
  • Problem
Photo of Larry Loen  WO7R
No Panadapter Signals. But WSJT-X and MixW2 see DAX info just fine.
Suddenly, today, I have no signals on my Panadapter.  Well, that's mostly true and is the main problem.  I miss my panadapter functionali...
  • 1 me too
  • 8 replies
  • Problem
Photo of Jim, KJ3P
TX Power Meter QRP Scale...
SSDR is so easy to use with low-power digital modes, wouldn’t it be great to have a 0-to-10 Watt scale for the RF Power meter for QRP u...
  • 6 me toos
  • 3 replies
  • Idea
Photo of Paul Lourd
Beginner remote operations with an amplifier - Get me started
I currently run my 6300 with an Ameritron ALS-600 and an LDG AT-600ProII tuner. I have three wire antennas on an Alpha Delta manual switc...
  • 1 me too
  • 10 replies
  • Question
Photo of Tilman D Thulesius
Running remote
Hi there folks. Im trying to find deep detail technical specifications on the technology used for running a 6x00_series radio. Specifica...
  • 2 me toos
  • 6 replies
  • Question
Photo of Condy Alley NI4Z
Flex 6400 on Digital Modes
I have a Flex 6400. I am running Smart SDR 2.3.9. I installed FL-Digi and had it working. Made contacts on PSK-31.  Did a new install o...
  • 1 me too
  • 3 replies
  • Question
Photo of Jerry Wilk
Flex hatred by other amateur radio operators
When you mention you are using a Flex radio most non Flex owning hams are supportive or neutral.  But a few hams get really angry like yo...
  • 1 me too
  • 42 replies
  • Question
  • Answered
Photo of ON5AM
question about SPE with Flex radio
Hi, maybe the answer has already been given but I'm still going. I have a flex 6300 and a SPE Expert 1.3k I think for all flex XXX and a...
  • 1 me too
  • 5 replies
  • Question
  • Answered
Photo of Jon - KF2E
WSJT-X configuration problem
I'm trying to get WSJT-X configured on my new 6600. I have version 2.1.33.106 of SSDR and version 1.8.0 r8193 of WSJT-X. When I try to co...
  • 2 me toos
  • 10 replies
  • Problem
  • Solved
Photo of Mark - NU6X
Help - Router - High Latency on WiFi Connection
I just upgraded to 1.6 and also got a new Surface Pro 4. I am trying "REMOTE"  for the first time. I am having a lot of dropouts due to m...
  • 1 me too
  • 18 replies
  • Question
Photo of Larry Loen  WO7R
Checklist for those upgrading from a 6300 (or 6500?) to a 6400 or 6600
I was able to get going with the simple "Quick Start" guide included with the 6400.  However, I ran into a few problems because I had an ...
  • 2 me toos
  • 1 reply
  • Idea
Photo of Larry Loen  WO7R
Downgrade of SmartSDR kills VSP
I am sending in my new Flex 6400 for service.  Because of this, I had to put my venerable Flex 6300 back in service.  The 6300 had never ...
  • 1 me too
  • 5 replies
  • Problem
Photo of Larry Loen  WO7R
Can I make Expert 1.3k or 1.5k work without DDUTIL?
I am currently operating an Alpha 9500 with my remote Flex 6300 setup. I have a 6400 on order, so the answer has to work for both a 6300...
  • 1 me too
  • 13 replies
  • Question
Photo of Larry Loen  WO7R
DAX Driver error because I enabled the Mic Stream
I have seen many variants of this in the community, but not my exact one.  I do not want to go through all that install/reinstall stuff u...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Dave AA6YQ
Description of 6400/6600 Architecture and Programming Model with comparison to 6300/6500/6700?
Where can I find a description of the 6400/6600 architecture and programming model that highlights differences from the 6300/6500/6700? ...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Fred GLENN
Reboot possible from a remote operation?
I've lost audio on my remote (VPN) 6500 both via my PC and my Maestro. My local 6500 via LAN works fine with both interfaces. Everything ...
  • 2 me toos
  • 8 replies
  • Question
  • Answered
Photo of Lasse Moell
Nedded Bandwith on Remote
What is the needed throughput BW (up and down) of my internet connection when running remote? Is there any differncies between using a VP...
  • 1 me too
  • 2 replies
  • Question
Photo of Don, VE2HJ
Remote RX only site
Hi, I am planning to put beverage antennas on a remote site one mile from my QTH. My gold is to RX from the remote site and TX locally.Wh...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Al
Multiple instances of WJST-X running fine but now there is a logging problem.
I have multiple instances of WSJT-X installed and operating fine on my 6700. However, there is one problem in that each instance of the p...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Andrew O'Brien
A=B or B=A at a mouse click with SmartSDR ?
Any way to have Slice A suddenly become Slice B and Slice B become Slice A and achieve this via a simple mouse click?  I am asking becaus...
  • 1 me too
  • 5 replies
  • Question
  • Answered