Flex 6500 FT8 Will not key on 5357 FT8
FT8 works on all bands except will not key on 5357 like its out of band or inhibited but 5357 is in band and I moved the bandwidth down o...
Larry - W8LLL
Joined on December 19, 2014
76
Likes received
14
Conversations posted
375
Replies posted
277
Conversations followed
Conversations
Conversations 1 - 20 of 274
SmartSDR - There are currently no radios available
Recently, I had to replace a hard drive in my computer because it ran out of space and Windows wouldn't update. I installed a brand new ...
Show Us Your FlexRadio In Your Shack
I thought it might be fun to have us Flex users show a picture of their FlexRadio in
their shack.
Here is my 6600M in
my shack. It's i...
Mox button Dont work
Smart SDR V2.0. I tried to use the MOX button a couple of times while not in remote cause I'm sitting at my desk right next to the Flex a...
FT8 was working OK when it suddenly lost the RF output power, RED TX LED still on and audio drive level still in the high YELLOW
FT8 was working OK when it suddenly lost the RF output power, RED TX LED still on, and audio drive level still in the high YELLOW area. O...
FIRST SDR - Brand New 6500 Owner: What do I need to purchase other than the box?
SDR Beginner - The 6500 is inbound, what should I buy to make it work great?
DDUtil TX 1 - 4 Inhibit
I am using the TX1 port from my 6600 to key my ALS-600 amp. From a cold boot the Flex and Amp work perfect. I also use DDUtil 3.2.6.00 to...
6600 Keeps Rebooting, Endless Cycle. Any Ideas?
Friday night my Flex-6600 started rebooting itself. About every 60 seconds to a couple of minutes. I thought
it might be computer relate...
Slice Master 6000 v0.10.5 is now available
As many of you have already noticed, Slice Master 6000 now supports placing cluster spots into the SSDR panafall via the recently enhance...
Profile Manager is gone
Running 2.3.9 with my 6500. Tried to select the Profile Manager, clicked on it and nothing happened. If I place my cursor on the "SDR" ic...
Why does the panadapter show the location I'm listening to, 100k off from where the yellow line is located?
This isn't a big deal, more of a curiosity but, why does the panadapter show the station I'm listening too 100k away from the yellow line...
sdr-1000
I pulled out the old Flex SDR-1000 with the 100 watt PA as the only option that I haven't touched since before I bought my 6500 in 2014. ...
I just received my Flex-6400 and Maestro. I can't get any audio out of the radio?
I'm trying to use the FHM-2 hand mic, and I'm not getting any audio out of the mic. Can anyone give me some ideas?
WSJT No RF
This has been asked so many times, but.... WSJT decodes fine, passes CAT test, DAX is selected in mike profile, level is mid way, (WSJT v...
FT8 Transmitted Signal in Panadapter
I have a 6600M and am new to FT8. What should my transmitted signal (35 watts) look like in the slice panadapter? Bandwidth is set to 5...
Succesful 6000 Power On/Standby Control on the Lan Solution with WeMo
Applying the open collector voltage as Steve N5AC advised then a small relay means an iOS or Android app with a Belkin "WeMo" IP switch &...
OmniRig v2.0 and FLEX Radios
I’m pleased to offer you my new ominiRig v2.0 development with the following new features: - Supports now up to four RIGs - You can name ...
The RF Suppressor Ground System Question
Hi, I want to use the RF Suppressor Ground System as described in the article on the flexwebsite (http://kc.flexradio.com/knowledgebase...
Did you know you can not backup Profiles on a 6600M?
No way to backup Profiles on a 6600M
6500 not turning on following 2 fast shut downs. I changed my station moving equipment to
Any internal fuses in the 6500?