Noise on CW RX with PTT - A solution
I have heard people complain off and on for years about noise on CW receive when PTT is activated, I have done some testing and this is w...
Ken - NM9P
Joined on August 4, 2013
1352
Likes received
168
Conversations posted
4071
Replies posted
2154
Conversations followed
Conversations
Conversations 1 - 20 of 38
jtalert and aclog
I finally decided to run a 2nd instance of WSJT-X and JTAlert to get ready for the Bouvet DX-pedition. It works well, once I changed the...
Wideband noise example
Here is a link to a Youtube video describing a wideband noise source at my QTH and how it interacts with various DSP controls on my 6500....
SSDR-IOS V.2.0 Speaker & Mic control anomalies.
I may have missed this in release notes in my excitement to play....
The Speaker Volume Adjustment and Microphone Volume Adjustment in...
IOS 10.0.1 has removes PPTP VPN. Now what?
After months and months of successful remote ops using my iPad and iPhone and PPTP VPN from my ASUS RT-AC66U router, the latest iOS updat...
No Receive Audio On Remote
I just got my new (refurb) laptop (HP Elitebook 8460p, Intel i5 Dual Core 2500MHz, 750Gig Serial ATA, 4096mb RAM, DVD ROM, 14.0” Wide...
RFI-Proof WiFi Router?
After tracking down the source of recurring spikes of interference all across the spectrum, I have determined that I need to replace my R...
Help! All my skimmer spots are 1400 Hz off frequency.
Using N1MM+ and SKimmer/Skimmer server with SDR Bridge. I must have something set wrong because all of my spots in the SKimmer and N1MM+ ...
transmit problem in V.1.4.16
If others have reported this, I missed it. I have had several instances where I opened a second panadapter, transmitted on the slice i...
Remote Audio and Parallels Access
I may have missed mention of this in other posts. My apologies if it is redundant. I have been experimenting with remoting my 6500 on L...
CW Skimmer/SDR-Bridge odd happenings . . .
OK, This is a strange one. If there is no ready answer here, I will take it to the Skimmer Forum. I downloaded Skimmer, Skimmer Server ...
My recent Journey to fix loss of DAX
My Situation: 6500 running V.1.3.8 Lenovo Ideacentre K410 Desktop running i3 & 6 GB RAM computer and rig connected directly to TPLink GB ...
PTT Sticks when using VOX
Here is a new one that I just discovered. on my 6500, using the latest 1.3 software. If I am using VOX and push the PTT footswitch while ...
repeated split-second audio dropouts
I jist finished running about 30 feet or so of CAT6 from the family room, where my Uverse modem/router/wireless head is located, to the h...
Three odd behaviors using the Flex control knob
More "testing" results for the software guys...
1) As I tune to either end of the display and the display begins to scroll, there are ...
APF Button stops working...Kills all signals when activated.
When switching from band to band and mode to mode with one pan and 2 slices, I have had several occasions when the APF button stopped wor...
MON sometimes goes active when not transmitting
I have had several occasions when the Monitor went active when I wasn't not transmitting, causing feedback from the speakers or hitting m...
AGC "forgets" sometimes
Several times recently, while changing bands & modes chasing DX the AGC seemed to be "stuck" in full open, fast mode, until I "bumped" th...
PTT Footswitch occasionally does not transmit when DAX enabled
It happened several times during the last Phone contest and again several times during the ARRL DX Phone contest... I am running my 6500 ...
RIT/XIT on 20 Meters USB crashes SmartSDR in V. 1.1
While trying to work RI1ANU split on 20 SSB, (14.205 Mhz) I tried to do it "quick and dirty" by using the RIT/XIT.
First I used the Fl...