SmartLink service needs to be more robust
I can see that there are a quite a number of posts and with that occasions when the SmartLink Service has been down for remote action.If ...
Kari Gustafsson SM0HRP
Joined on March 27, 2015
34
Likes received
44
Conversations posted
232
Replies posted
119
Conversations followed
Conversations
Radio disconnects
Radio seems to drop out when left on with the latest beta upgrade, never had the this happen with previous beta so this may be a new prob...
Unable to connect using smartlink, i usually get a green light, but not always.
Unable to connect remotely using smartlink, i usually get a green light, but not always. I can connect locally and occasionally through c...
Remote problem
I am trying to use another owners radio to test SmartSDR 2.3.9 on Windows 7. If I ping the remote radio in a command prompt, I get aroun...
CW hickups when using USB cables
I am using an external keyer (Winkey) with my 6700 on v1.10.16.91 with a 4 port FTDI Serial port Adapter attached to the USB port. I've h...
Maestro Locks Up: Pan Adapter and Waterfall Disapear one day before live TV interview
Suddenly from two different Maestros at different locations we get the same phenomena. After som 20-30 min of operating each of the Maest...
v3.0.19 with Antenna Genius
I just updated to v3.0.19 and diversity seemed to worked great with AG. When DIV selected ANT2 was selected properly and the AG app showe...
My Flex 6700 still occasionally locks up when left on for an extended period of time.
My Flex
6700 still occasionally locks up when left on for an extended period of time
and not being used. This is with the new SmartSDR ...
v1.10.15 once lost network connection and locked up during transmit
I previously reported that the network connection loss problem is still existing with 1.10.15 beta. It is a lot less frequent than with t...
USB Cables
Just installed 2.1 and one of my USB cables is hashed out. What does this mean. This cable controls my 4o3a antenna switch. I'm dead in t...
Flex 6600m and N1MM SO2R not working properly
Hello
Setting up SO2R on Flex 6600M. RX working fine and correct switch between radio1 and radio1, but TX not. Sometimes when I start C...
No more sidetone or monitor after installing rev 3
No more sidetone or monitor after installing rev 3. Uninstalled back to 249, ok, reinstalled V3 and all gone again, done this 4 times! di...
Interlock / RCA TX REQ not active during TX!
I want to
use the Interlock / RCA TX REQ input for safety features, e.g. temporary SWR
fault.
I was able
to setup all the stuff (ac...