Remote serial operation via VPN
Have remote station operating with Flex 6700 through Elecraft KPA 500 and KAT 500 tuner into ZS6BKW inverted V up 45 feet. Great recepti...
Kari Gustafsson SM0HRP
Joined on March 27, 2015
11
Likes received
37
Conversations posted
135
Replies posted
74
Conversations followed
Conversations
Conversations 1 - 20 of 73
Are you new to 1500 watts power?
I wanted to share a story especially if you are about to run some real 'full' power. On my home station, my 6M beam is on the roof on a ...
No N1MM CWX local side tone
I am using SmartSDR V2.2.8 in conjunction with N1MM. The Flex CWX works great with local CW side tone. However, when using N1MM with th...
Does the Antenna Genius 8x2 Plus disconnect the antennas to the Flexradio, when power is removed?
One or Two Monitors for SO2R Contesting with 6600M?
As I wait for delivery of my 6600M next month, I am trying to decide whether I should configure my station for one (large) monitor or two...
Best Settings for CW Contesting with 6600M?
I enjoyed using my 6600M for the first time in the WPX CW Contest last weekend. The interface with N1MM+ and the SO2R switching worked re...
Show Us Your FlexRadio In Your Shack
I thought it might be fun to have us Flex users show a picture of their FlexRadio in
their shack.
Here is my 6600M in
my shack. It's i...
Next version of DXLog will be much improved for Flexradio
As some may have experienced DXLog has not really played 100 % well with Flex-6000 series. At least not for SO2R where you rely on rapid ...
Smartlink and paddle CW?
Hi, I am proud owner of a 6600M (no extra Maestro) and love it. Got N1MM+ all integrated and started to play with SO2R as well. So far so...
Fast SO2R switching now possible with new 2.2.8
As some already have indicated version 2.2.8 is really an improvement also in the field of SO2R switching. I have only tested it in remo...
rx hash in my ears when MOX is applied during cw sending.
Using SSDR 2.2.8, N1MM+ and SSDR CAT winkey emulator. N1MM+ asserts PTT to send a cw message and MOX button on SSDR goes blue to show PTT...
Commcat4 Logger installation
I tried to install the Commcat 4 logger program onto my Flex6500. It comes up fine, but I'm unable to have it talk to the radio. Has anyb...
New Version 2.4.0 of SmartSDR for iOS available
I have just released a new Version of SmartSDR for iOS that contains the following changes and bug-fixes:
■ Aligned with the latest F...
How to assure in SO2R that you really utilize different SCU:s when needed?
When configuring and running SO2R with a 6700 (dual SCUS:s) in contests you need to be running duplex so that you can transmit on e g 40 ...
RemoteQTH and Rig Control
Looking to remote my 6700 and use RemoteQTH as the brains of the operation for remote on, antenna switching and other stuff. I've seen...
Maestro Locks Up: Pan Adapter and Waterfall Disapear one day before live TV interview
Suddenly from two different Maestros at different locations we get the same phenomena. After som 20-30 min of operating each of the Maest...
Maestro problem...after problem
i have a Maestro since 20 month FlexRadio change 4 times on warranty. Many time I opened a ticket for the problems but after the last ex...
KPA1500
http://www.elecraft.com/KPA1500/KPA1500%20FAQ%20rev%20A1b.pdf
SO2R behavior of the ~ button (muting and unmuting the unfocused RX) no green light
It seems that when doing SO2R, all of the normal OTRSP operations work as expected with N1MM+ Logger, except for the ~ key. Pressing the ...
How to add remote CW contest capability to Flex-6000 without a remote PC
Flex-6000 series is a great contest radio. However, when running contests from a remote location (without a remote PC) present SDR softwa...