Conversations

Conversations 1 - 20 of 204
Photo of Jerry Dixon
On my 6700 I cannot get the GPSDO to work.
On my 6700 I cannot get the GPSDO to work.The factory just installed the optional GPSDO.I tried the supplied antenna, waited an hour, no ...
  • 1 me too
  • 10 replies
  • Problem
  • In Progress
Photo of Peter
6300 not starting/turning on
I  have had my Flex-6300 for 5 months and have installed (successfully) all of the various updates without issues until today. When I tun...
  • 2 me toos
  • 8 replies
  • Question
Photo of Bjørn Ove Kristiansen
Status, SmartSDR 2.0?
A few years back, Flex Radio Systems released a roadmap for SmartSDR. It stated that version 2.0 would be released sometime in 2015. Wi...
  • 2 me toos
  • 11 replies
  • Question
  • Answered
Photo of K2CM
For Sale my wonderful 6700
Events require me to sell my 6700. Email me: george at gloria.us. Please bear with me as I am in Mexico at the moment. Will be home Sund...
  • 2 me toos
  • 1 reply
  • Idea
Photo of K2CM
Flex via VPN success!
K2NCR and I have installed an ASUS router with built in VPN into my home network.  We are are both able to connect to my Flex 6700 and ma...
  • 7 me toos
  • 8 replies
  • Praise
Photo of KM6CQ - Dan
CW keying, is it working well for you?
I was using my Palm Radio SL paddle with my radio from the "E" company. It was so easy. I thought well,,,, so I plugged in the N3ZN SL pa...
  • 1 me too
  • 11 replies
  • Question
Photo of Dave
multi CQ DXer
I have never seen this before.  Some one calling CQ DX simultaneously every 500 Hz. If I were to guess, he is in SSB mode with a tone on ...
  • 1 me too
  • 8 replies
  • Question
Photo of W1IMD
Multiple radios on the network, how can I select DAX for each?
I have a 6700 and a 6300 on my network. We operate them remotely via a VPN. The issue is that a friend wants to run JT-65 and when he con...
  • 2 me toos
  • 5 replies
  • Question
Photo of Michael J. Westfield
I need an elmer for a used flex 1500 I just purchased.
I am new to SDR so any help would be appreciated.
  • 1 me too
  • 2 replies
  • Problem
Photo of elan
where i can buy new power cable for the flex 3000?
hello  is any one may be flex can tell me where i can buy new power cable for the flex 3000 ?  thank you  73 elan g0uut
  • 1 me too
  • 1 reply
  • Question
Photo of vincentjlawrence
Poor/Bad Transmit Audio Flex-6300
Very poor TX audio with Flex 6300 as reported by numerous people. I would like to return the radio for examination. What is ECO 75-1006? ...
  • 1 me too
  • 22 replies
  • Problem
  • Solved
Photo of Rick Hadley - W0FG
Runaway transmitter V1.7.30.78
After installing 1.7 and the Maestro, I ran into a couple of instances where the 6500 transmitter would key itself and remain locked up i...
  • 1 me too
  • 4 replies
  • Problem
  • Acknowledged
Photo of Jon - KF2E
SSDR for Apple Watch?
I saw someone talking into his wrist and assumed he was on a phone call. When I got closer it was a 20m contact. I grabbed this pic and a...
  • 3 me toos
  • 7 replies
  • Praise
Photo of tompanderson
GPS install/uninstall greyed out
I had my shack rebuild and now the gps tab wont let me install or uninstall and the dat is blank. status is not present. The led is solid...
  • 1 me too
  • 3 replies
  • Problem
  • Acknowledged
Photo of Robert AA6UP
Sensitivity on one slice depends on which band oposite slice is on
I am running SSDR v1.7.30 on a Flex 6300. I just thought we were going through a bad period in the current sunspot cycle. No matter whi...
  • 1 me too
  • 3 replies
  • Problem
  • Solved
Photo of Robert -- N5IKD
40M SWR too high
My ATU tunes every band except 40m. My IC-706 reports 1:1 on 40 with no tuner, but transmitting with the flex reports a high SWR with eit...
  • 1 me too
  • 15 replies
  • Problem
Photo of K2CM
Remote power on
It would be ideal if a configuration option for Remote Power on would be provided to keep the GPS running while the radio is off. Current...
  • 1 me too
  • 2 replies
  • Idea
  • Implemented
Photo of K2CM
Lockout does not prevent TX-1,2,3 from being triggered by the Mike or Key
When Lockout is active, the Mike or Key will not generate RF output; but, the TX-1,2,3 outputs are triggered just as if the radio was tra...
  • K2CM, 2 years ago

  • 1 me too
  • 0 replies
  • Problem
Photo of K2CM
Scope Function in the 6000 series
Will the scope and panascope function be provided in future releases of SmarrSDR? I used these features for FMT's.
  • 15 me toos
  • 10 replies
  • Idea
  • Planned
Photo of K2CM
Transmit Interlock allows tune in CW mode
The transmit Interlock prevents transmission  in both CW and SSB.  In SSB, it also locks out "tune".  In CW mode, "tune" is allowed, and ...
  • 1 me too
  • 1 reply
  • Problem
  • Acknowledged