In SS SSB...Audio Problems with N1mm
Not getting audio monitor in headset. Only speaker. Long delays after using Fkeys (N1MM)
John Kludt
Joined on August 10, 2017
2
Likes received
6
Conversations posted
12
Replies posted
12
Conversations followed
Conversations
New Issue with DAX after Win10 upgradee
After latest Win 10 Upgrade I get the following message when starting Dax - "Warning DAX driver may not have installed correctly. Anothe...
Why you need a PGXL?
The PGXL seems to be a superb advanced Amp capable of 1500W Key Down for extended periods of time which is totally integrated into the Fl...
V2.0 port forwarding
Port numbers to be forwarded: 4993 and 4994 or 4992 and 4994? I have seen both. Does it matter? I set SmartLink and my router to 4993 ...
flex 6600 so2r setup - Non- Tx Radio Muted
Setting up Flex 6600 and Maestro for SO2R with N1MM Think I have followed all the directions but/and the non-Tx slice is muted when I am ...
How-To 2m and 70cm DEMI Transverters on a 6700 & Questions
I have researched the forum for Transverter installation options/ideas and there are several threads floating around with information. It...
Maestro Switches to MIC1 When USing PTT
MAestro with 2.1.33. I have a PR781 plugged into the connection on the back of the 6700. If I push the MOX button on the Maestro everyt...
DAX and CAT with 6600M
I have puzzled through the manuals and still don't understand use of DAX and CAT with my 6600M (first Flex radio and first SDR). (1). ...
The Importance of The Manuals
I was once accused of not being a "real ham" because I have always read the manuals for my equipment. I started with Flex with a 1500 an...
Writelog SoundWave error when using SSB F key messages with 6700
I can't get the F key messages to work with WL and my 6700. I have tried recording on the fla and recording with Audacity. I am using t...
Warranty transfer problem, not good business.
I have been a LONG time supporter of Flex (many many years) and I have had just about every radio they made. I recently had a problem wi...
Cycling bandwidth filters
Running a 6700/Maestro/V2.0. On the Maestro I used to be able to cycle through the series of preset bandwidth filters with a series of s...