Conversations
A friend has an issue with his 6400 where DIGU has suddenly stopped working. The TX button is yellow and only flashes to blue then return...
Panadaptter gain on 20M different from other bands
My SmartSDR panadapter on for my 6500 on 20M recently changed after the RTTY contest this past weekend so now the increments are 0, -20, ...
No RTTY Monitor Phones/speaker
My RTTY "diddles" from MMTTY when transmitting can no longer be heard in my phones or powered speaker. I'm using a 6500 with SSDR v2.5.1....
Can the DAX TX stream level be controlled by different profiles?
I would like to control the DAX TX stream for different applications, such as RTTY when using an amp and RTTY when not using an amp. When...
Some spots do not disappear after N1MM+ timeout
Today I tried to use the Flex Spots option in my 6500 with SmartSDR v2.4.9 for the RTYY WPX contest. They populate from N1MM+ correctly b...
N1MM+ and CW Skimmer - again
I'm still trying to get Skimmer to
populate the entry box in N1MM+. The calls appear on my 6500 panadapter
fine and when I click on t...
DAX Audio-again
I am using SmartSDR 2.3.9.112 with my 6500. I encountered a DAX driver error and did several uninstall/install routines along with having...
For FT-8 TX Settings
I have the 6500 and would like to know if there are preferred TX equalizer settings for FT-8? Should it even be turned on?
Audio popping in 2.3.7
After upgrading to 2.3.7 I have noticed loud "pops" when receiving CW and at the same time the SmartSDR display pauses. This is quite ran...
Spots not in 2.3.9
I just upgraded to 2.3.9 and the spots that were appearing in 2.3.7 are no longer being received. The Telnet connection is feeding spots ...
Is there still a 6500 User Guide?
I failed to download a 6500 User Guide and can no longer find it online. Is it still available and where can it be found?
Pops and snaps in Maestro audio after upgrade to 2.1.32
I upgraded to SSDR 2.1.32 and all is well except when accessing the Flex 6500 with the Maestro I notice random snaps and pops in the audi...
DSP Settings Lost When Mode is Changed
DSP settings are lost whenever the modulation mode is changed. For example, in CW mode I set NR and APF, I switch to USB, and then I swi...
Combining display parts
I just read that you use a little up or down arrow to pop out or return the TX/CW/ etc window but where is this located?
Auto Switch TX Disable control not functioning
When I am operating using RTTY with my 6500 and try to operate split, the transmit slice is always Slice A. Even if I disable the Auto Sw...
QSK button on CWX display
I am a new 6500 user. After having read the various documents about QSK, I am wondering exactly what purpose the QSK button on the CWX di...