Conversations

Conversations 1 - 20 of 240
Photo of John Ferrell
When I boot into PwrSDR I can only get the demo mode to open. The error message says to run setup. I don't have a setup.
I don't find anything allows me to select a model. The serial number and model are  in the display with the Demo mode.
  • 1 me too
  • 4 replies
  • Question
Photo of paul
6600 power switch has flashes red
several  times power switch has  been flashing red  in receive and had to reconnect
  • 1 me too
  • 7 replies
  • Question
Photo of Miquel
CB Linux repeater using flx 1500
Hi i want to make CB repeater using raspberry pi And flx1500 SDR but i dont know how. Thanks
  • 1 me too
  • 3 replies
  • Idea
Photo of Tim K9WX
Deleted com ports keep returning
In the course of learning how to use my 6600, I have created and then removed a number of Com ports in SSDR CAT.  I am finding that the c...
  • 1 me too
  • 5 replies
  • Problem
Photo of Andrew Thall
6300 fuse
Due to operator stupidity, I had the wrong antenna connected to my 6300 when I transmitted and the radio shut itself down and won't resta...
  • 1 me too
  • 4 replies
  • Question
Photo of Jeff-W7NEE
Your Antenna Choice for Multi Receive.....
I am curious what antenna system you are using to take advantage of the Flex SmartSDR's Multiple SCU and Slices. I have a 6600 on order a...
  • 2 me toos
  • 15 replies
  • Question
Photo of Jon - KF2E
Dead Ethernet Port
Two days ago I turned on my radio and it never showed up in SSDR. I did a little troubleshooting and found I had no lights on the etherne...
  • 1 me too
  • 12 replies
  • Question
  • Answered
Photo of Jeff - G4IUA
New 6600M problems?
I seem to have some problems with my 3 day old 6600M but I hope it is down to something I am doing (or not doing).  Using either VFO ...
  • 1 me too
  • 11 replies
  • Problem
Photo of Andrew Thall
Make a Linux compatible version of SmartSDR
A version of SmartSDR compatible with Linux would be welcome.  It would avoid all the problems with Windows updates and would be much mor...
  • 2 me toos
  • 9 replies
  • Idea
Photo of Larry Williamson
5000a Remote Operation "How do you do it"
Hello, I have never did this before---- never thought I would ever use it. Now we have a mountain cabin in Idaho---- well heck, let's ...
  • 1 me too
  • 12 replies
  • Question
  • Answered
Photo of Amlan - AI6XN
Please switch to a bnc cable for 10MHz in
An humble suggestion. Please start using a bnc female instead of rca for the 10MHz in. Every GPSDO worth mentioning uses a BNC. Let’s try...
  • 4 me toos
  • 10 replies
  • Idea
  • Not Planned
Photo of Tony WV2C
FLEX CONTROL by K6TD/K6TU
Since taking delivery of my FLEX 6400m my Flex Control has been sitting on my desk unused. I've adjusted well not using the control but I...
  • 1 me too
  • 7 replies
  • Question
Photo of Ron W4RDM
Anyone had their router hacked?
Was checking my remote site router today and found changes to the language (changed to korean), ddns, etc. Changed everything back. Route...
  • 1 me too
  • 6 replies
  • Question
Photo of Mike - W8MM
Maestro and Built-In Car Hotspot Oddity
I have been messing around with SmartSDR for iOS and Maestro in my new car using the built-in AT&T-provisioned LTE-to-WiFi hotspot. When...
  • 2 me toos
  • 6 replies
  • Question
Photo of N3CHW
Question about Transverters function with Flex6300
I was thinking about buying a transverter from the Transverters-Store. In particular the 144/28 transverter board but after reading this ...
  • 1 me too
  • 3 replies
  • Question
Photo of Ron Parsons
Adapting Flex Radiosport headset from Flex-6500 to Flex-6600
I am using a Flex Radiosport headset with my Flex-6500. It came with a cable with a 1/8" TRS plug and an 8-pin Foster connector for the M...
  • 2 me toos
  • 3 replies
  • Idea
Photo of Roger J. Buffington
Very little SSB activity on 20M?
Is it my imagination or has 20m SSB significantly decreased in popularity?  I know we are near the sunspot minimum, but gee there sure do...
  • 1 me too
  • 8 replies
  • Question
Photo of EA4GLI - 8P9EH - Salvador
How-To 2m and 70cm DEMI Transverters on a 6700 & Questions
I have researched the forum for Transverter installation options/ideas and there are several threads floating around with information. It...
  • 10 me toos
  • 32 replies
  • Idea
  • Implemented
Photo of Jerry Wilk
Flex hatred by other amateur radio operators
When you mention you are using a Flex radio most non Flex owning hams are supportive or neutral.  But a few hams get really angry like yo...
  • 1 me too
  • 42 replies
  • Question
  • Answered
Photo of Jon - KF2E
Ground stud
I use braided cables to ground all my equipment to a single ground point. The ground stud on my 6600 is too short to allow the thickness ...
  • 1 me too
  • 3 replies
  • Idea