Add an NCDXF Beacon monitor function into SmartSDR
The NCDXF runs a group of HF beacon transmitters strategically located around the world, transmitting at specific time slots at various p...
KY6LA - Howard
Joined on August 3, 2013
1450
Likes received
79
Conversations posted
3516
Replies posted
1611
Conversations followed
Conversations
Conversations 1 - 20 of 1603
Succesful 6000 Power On/Standby Control on the Lan Solution with WeMo
Applying the open collector voltage as Steve N5AC advised then a small relay means an iOS or Android app with a Belkin "WeMo" IP switch &...
The BatBeam Project
As I have met so many great amateur radio operators here on the Flex forum, I would like to put forth an idea for a software-defined ante...
Legal Limit Solid State Amp - SPE 2K-FA, KPA-1500 or ??
Looking at solid state legal limit amps with integrated tuner for use with 6700. The SPE 2K-FA and recently introduced Elecraft KPA-1500 ...
wsjt-x spots to slicemaster
What is the setp to get the spots from wsjt-x over to slice master??What goes in the port box on Slice Master
WSJT-X Advantages of Setting up multiple instances each with unique panadapters and Slice?
I have read several posts that recommend setting up WSJT with a different configuration file for each band where each configuration has i...
The NEW Voice Keyer WORKS!
Contest Voice Keyer for
SmartSDR
This is an update for an old topic https://community.flexradio.com/flexradio/topics/voice_keyer...
Anyone using Flex GPSDO as time server? As a waveform?
The GPSDO option in my 6500 is a full function GPS receiver, delivering latitude, longitude, altitude, speed, and 10 MHz reference freque...
Can I make Expert 1.3k or 1.5k work without DDUTIL?
I am currently operating an Alpha 9500 with my remote Flex 6300 setup. I have a 6400 on order, so the answer has to work for both a 6300...
Flex hatred by other amateur radio operators
When you mention you are using a Flex radio most non Flex owning hams are supportive or neutral. But a few hams get really angry like yo...
Controlling a SteppIR SDA Controller
I note a number of very useful comments about controlling the SDA100 using DDUTIL, I have an S12 cable, but I cannot get the pc to connec...
Wife wants an iPad (read newspaper/FaceTime)
I know this is off topic, but there are many knowledgeable Apple users on the Flex community. Which one should I buy her and what's a goo...
SmartSDR Purchase?
I am very sorry if this question sounds completely dumb and if it offends anyone, but I have been away from this hobby for an extended ti...
Remote use with low bandwith RS-BA vs. Flex
Hello.For remote i have Icom 7610 without computer, i use this traveling under 3G/LTE and works very good because its possible stop water...
What is the maximum power for full key down (100% duty cycle) for the new 6600.
Is it 100w or is it a lower backed off power ?
PowerGenius Tuner
Has the tuner debuted at the Flex Booth. If yes how about a pic. Thanks Rich - N5ZC
SWR READING ON 6400
Is there a calibration for the SWR meter on the 6400?
Can an iPad run iOS SSDR and digital program?
Is it possible to use an iPad to run iOS SSDR and digital communications applications at the same time? (Toggle between the App's.) Idea...
_large.jpg)
vpn setup
Trying to set up the Softether VPN Server.
Here are the screen shots of what I have. Am I getting anywhere? I don't know what to...
Why you need a PGXL?
The PGXL seems to be a superb advanced Amp capable of 1500W Key Down for extended periods of time which is totally integrated into the Fl...