Conversations

Photo of Martin Ewing AA6E
Losing Maestro audio stream
I like to operate my 6500 with Maestro and a Win10 PC running DAX/CAT for logging (log4om), WSJT-X, and Fldigi.  Mostly this works, but l...
  • 3 me toos
  • 11 replies
  • Problem
Photo of Hardy
VPN with 2.3.9 now uselessly
Up to 2.2.8 all was ok. With 2.3.7 ist getting worse ... With 2.3.9 VPN is uselessly. All 10 seconds a break of approx. 3 seconds arises...
  • 1 me too
  • 10 replies
  • Problem
Photo of James Nelson
Succesful 6000 Power On/Standby Control on the Lan Solution with WeMo
Applying the open collector voltage as Steve N5AC advised then a small relay means an iOS or Android app with a Belkin "WeMo" IP switch &...
  • 5 me toos
  • 28 replies
  • Idea
Photo of Hardy
Stand alone Interaface (Flex 6x00 - Maestro - Ultrabeam - Expert Linear)
I have built an interface around a Flexradio 6x00 with Maestro console and amplifier (Expert 2K-FA) and dynamic antenna (Ultrabeam, Stepp...
  • 6 me toos
  • 15 replies
  • Idea
Photo of Bill -VA3WTB
Transmit RF power at 100 on startup?
After changing to V2.1.30 the RF setting is always at 100W on startup and is not saving were I leave it? If I toggle to another profile t...
  • 1 me too
  • 12 replies
  • Problem
  • Solved
Photo of Mark - WS7M
Raspberry Pi C code to talk to flex?
Has anyone written in Raspberry Pi (linux) C code to connect to and talk to the flex that they would be willing to share? I have built a...
  • 2 me toos
  • 2 replies
  • Question
Photo of Hardy
SmartSDR 2.0 and Ethernet API
How does the Ethernet API change with Smartsdr 2.0?
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Frank, HB9FXQ
Here is a working Workaround for routed VPNs / Radio in other subnet / OpenVPN TUN Setup
For the network experts in the forums, that need a workaround for the broadcast based discovery (e.g. complex network topo or OpenVPN TUN...
  • 2 me toos
  • 3 replies
  • Praise
Photo of Stu2
Can't connect to 6700 after upgrade to 1.9.7
Hello all - I tried upgrading from 1.8.4 to 1.9.7 and now I can't connect to my 6700. When I upgraded, the yellow indicator bar went to...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of Hardy
Network issue with v1.9.7
If you upgrade to 1.9.7 you cannot connect to Flexradio any more. How to solve: Connect your Flexradio with direct lan cable to pc with ...
  • 2 me toos
  • 15 replies
  • Problem
  • Solved