New FHM-3 Mic - Opinions ??
I don't use mic's to often these days, and rather use a hand mic when I do. The FHM-1 I have with my 6500 is to me, just awful. Is the ...
K6HN
Joined on November 25, 2015
2
Likes received
1
Conversations posted
21
Replies posted
367
Conversations followed
Conversations
Conversations 1 - 20 of 356
.PCM files....anyone else seeing these
Flex 6400 / Win 10 ... both using most current software -- Recently, I got a disk getting full message...which made no sesne at all to me...
Touch Portal Questions/Recommendations
I’ve read with a great deal of interest the posts regarding the use of Streamdeck hardware or Touch Portal software to control various as...
VHF Contest this weekend -- Share your Flex setup.
I am an HF contester. :) However, the ARRL VHF Sweepstakes is this weekend, so I wanted to share what I am thinking of. First, after r...
OK, has anyone been able to work the JA's on 160 FT8 using a flex? 1.840 TX, 1.908 RX
I'm no connection wiz so Slicemaster was a god send for me. Works great to configure the radio for FT8 as long as your in the 3K passban...
Stream Deck Question
I have my stream deck working well for the Flex as well as a bunch of Computer task. If you don't have one you are really missing out. ...
Slice Master 6000 v0.10.6 is now available
As usual, you can head over to https://github.com/K1DBO/slice-master-6000 to read the latest README or just download the latest zip from ...
USB PTT foot-switch
that something i have in my brain for some time to build a USB PTT foot-switch i operate remote and already have USB studio mike and no...
Two DAXs on the one computer
Dear Flex community members,I have idea to use two flex radios, one in the shack second one on the remote station reach via smartlink. Do...
4o3a Antenna Genius ? or Hamation 8 pack
I have recently switched to using W1TRs excellent HF-Auto software and am finally happy with the HF-Auto after a few years of frustration...
system boot - "Select a Version"
When booting up the 6400M, the user eventually arrives at a screen that displays three soft buttons: Info/Connect/SmartLink Setup. After...
USB cables no longer function with v3.1.8
I just updated from v3.1.7 to v3.1.8 and suddenly all of my USB cables (defined in SSDR and connected to the rig) no longer function. My ...
RX audio delay on PC speakers
Since updating my 6700 to V3.1.7 then 3.1.8 I get a significant delay in the PC audio vs the panadapter display (delay can be up to 1 sec...
NEW VIDEO 10 (+) MINUTES WITH HB9FXQ – FLEX 6XXX & OPENVPN + WEBSOCKET BASED WATERFALL
Basicly a proof of concept for a OpenVPN based remote solution. https://www.hb9fxq.ch/index.php/2016/03/06/new-video-10-minutes-with-hb9...
V3 with DDutil and KPA500/KAT500 Problem
What changed in V3 with regards to DDUtil? I've updated my 6600 to V3 yesterday and immediately noticed my Elecraft KPA500 and KAT500 no...
FlexLogger Emerges
Hi All,A while back I showed my quickly spun logging program and found a fair number of you had some interest. So... being the idiot I a...
6600 vs 6500
I am looking to buy a new Flex either the 6500 or 6600M. I recently bought a Maestro, for a good deal, in anticipation of buying the tran...
FT8 Decode failing caught on video
As many of you know I've been dealing with an FT decoding issue for a long time. I've sent the radio in for repair but the problem is sti...
Are there any Flex users net's on the west coast?
I see some really old posts on this question but nothing recent. I think it would be great to have a weekly west coast Flex users net.
FLEX net
So the only FLEX users net is on Sundays or is there another one??? I'm thinking we need to set another net up if thats the only one.. c...