Conversations

Conversations 1 - 20 of 38
Photo of N5CQ
Can't transmit FT8 Using Smartlink
Installed SmartSDR 2.4.9 with no problems, SSB and CW work fine, now trying FT8. Transmit works fine in CW and SSB, as does TUNE in SSDR....
  • 2 me toos
  • 8 replies
  • Question
Photo of Tilman D Thulesius
SmartLink service needs to be more robust
I can see that there are a quite a number of posts and with that occasions when the SmartLink Service has been down for remote action.If ...
  • 1 me too
  • 22 replies
  • Problem
Photo of Zack Schindler
How to get CW Skimmer working with my 6400?
I have never been able to get CW Skimmer v2.0 working with my 6400. The Skimmer window never shows the correct frequency and does not dis...
  • 1 me too
  • 4 replies
  • Question
Photo of Al Reeves
FT8 setup with Flex 6300
I have my Flex 6300 setup with the latest version of Ham Radio Deluxe (HRD) to operate and log digital modes (PSK, RTTY etc.).  The setup...
  • 6 me toos
  • 6 replies
  • Question
  • Answered
Photo of Rick  WN2C
Is the Auto notch filter ever going to be fixed?
Had a station tuning up today in my passband and hit the ANF and lo and behold it does not work. Did a search on the forum and found some...
  • 4 me toos
  • 21 replies
  • Question
  • Answered
Photo of Fred-NA2U
SmartSDR v2.1.33 - CAT Won't Open
CAT v2.1.33 downloaded with SmartSDR v2.1.33.  After obtaining license for new version and updating I seem to have lost access to CAT.  I...
  • 1 me too
  • 2 replies
  • Problem
Photo of Manuel - W4SSB
SmartSDR 2.0 upgrade fee
If I buy a new 6300 now and SmartSDR V2.0 comes out during my warranty period will I have to pay for the upgrade?
  • 1 me too
  • 10 replies
  • Question
  • Answered
Photo of Fred-NA2U
Flex 6300, SSDR v1.10.16, N1MM Again
I was operating in the RTTY WPX.  Everything was working fine when I shut down last night.  This morning the Flex 6300 (vv1.10.19.91) won...
  • 1 me too
  • 4 replies
  • Problem
  • Solved
Photo of Hugh - VA3TO
Logging remotely by WAN using different computers ?
I'm really enjoying my 6300, mostly used remotely via VNC. I've been considering the v2.0 upgrade but like many others, I'm having a hard...
  • 1 me too
  • 13 replies
  • Question
  • Answered
Photo of Carsten, DL6LAU
SmartSDR will not RX outside of Ham bands
Hi, I have an odd problem (probably overlooking something). I have an antenna on ANT1 on a FLEX 6500. When I move outside 'the Ham Bands...
  • 1 me too
  • 9 replies
  • Question
Photo of Roger
Help! Panic.. setting in!
Came in the shack this afternoon and found that my 6300 will not transmit....well...press the Tune button, Red TX led lights but there is...
  • 1 me too
  • 5 replies
  • Problem
  • Solved
Photo of Wolf - DF7KB
EME with Flex 6500 + Transverter; Rig Control Error using doppler shift in WSJT-X V1.80
Running Flex 6500 with V1.11.12 + 70 cm Transverter +WSJT-X V10.0 Just wanted to test the EME capabilities. WSJT-X has an EME Echo Mode...
  • 1 me too
  • 10 replies
  • Problem
  • Solved
Photo of N0AZZ
What is the offical way to connect a receive antenna (small magnitic loop) to the 6500 series? Have searched but not found a good way to do.
What is the offical way to connect a receive antenna (small magnitic loop) to the 6500 series? Have searched but not found a good way to do.
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of James Del Principe
configure cat in 1.11.12
I just upgraded my 6500 to V 1.11.12 from V 1.10.16 and now I cannot configure com ports in CAT as required. I had COM 4 for FLDIGI. As l...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Bill
Flex 6300: How can I Remotely Control the Base Radio Off and On?
I use my Flex-6300 in a remote location to avoid the QRM of the city and gain access to a better antenna.  This works great, as with the ...
  • 2 me toos
  • 14 replies
  • Question
  • Answered
Photo of Fred-NA2U
CAT Won't Open
Running Smart SDR v.1.10.16 and CAT v1.10.16.  CAT worked yesterday, it won't open today.  Suggestions?
  • 1 me too
  • 3 replies
  • Problem
Photo of Fred-NA2U
Flex 6300, SSDR v1.10.16, N1MM
I finally broke down and upgraded from SSDR v1.6.17 to v1.10.16.  I fired up N1MM to set up for the RTTY contest and N1MM and the Flex ar...
  • 1 me too
  • 6 replies
  • Problem
  • Solved
Photo of AH6FF
I would like to know how you share smart link with another user
I would like to share my 6300 with a friend and he would like me to be able to access his 6700. It this possible with smartlink. Thanks f...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of John - AF3K
Integrating DX Cluster Spots with SmartSDR v2 (demo)
Here is a quick demo showing the cool integration of SmartSDR v2 with the Spectrum Monitor in N1MM+.  Among other things, this enables li...
  • 9 me toos
  • 10 replies
  • Praise
Photo of Al Reeves
6300 and V2.0 Upgrade is it Worth it??
I'm thinking of upgrading my 6300 V2.0 and want to know if the benefits are worth the $200 cost.  First of all I'm not at all interested ...
  • 1 me too
  • 12 replies
  • Question
  • Answered