Conversations

Conversations 1 - 20 of 103
Photo of Pat N6PAT
Gave 2.4.9 a second try but it failed
I gave 2.4.9 a second try but no good. Running 6700 with Windows 8.1 Monitoring very strong CW using 2.3.9 and the meter is hitting +2...
  • 1 me too
  • 2 replies
  • Problem
Photo of Mark Erbaugh
Can't Remove FabulaTech com port
I'm trying to remove all of SmartSDR 2.4.9 from a Windows 10 computer that I will no longer be using with my Flex 6700. In the device man...
  • 1 me too
  • 6 replies
  • Problem
Photo of Bob Craig, K8RC
Back to 2.3.9
My 6300 doesn't like 2.4.9:- DAX won't transmit. Audio in present into the radio (shows on mic audio level meter on the SSDR client) and ...
  • 1 me too
  • 6 replies
  • Problem
Photo of Pat N6PAT
SSDR 2.4.9 DAX RX level issues
The DAX RX levels for 2.4.9 are causing problems with FT8 decoding. The slightest change causes decoding to stop. It's very inconsistent....
  • 1 me too
  • 2 replies
  • Problem
Photo of WX7Y
Issues with SmartLink in SmartSDR v2.4.9
Issues with SmartLink in SmartSDR v2.4.9 radio chooser with DAX and CAT not finding the radio, SmartSDR seems fine. 
  • 1 me too
  • 6 replies
  • Problem
Photo of Ben Sinclair
D-Star Transmit Issue
I'm using a Flex 6300 and a newly constructed Elecraft XV144 transverter, and am trying to connect to the local D-Star repeater, but am n...
  • 3 me toos
  • 18 replies
  • Problem
Photo of W9ILY
Spots not in 2.3.9
I just upgraded to 2.3.9 and the spots that were appearing in 2.3.7 are no longer being received. The Telnet connection is feeding spots ...
  • 1 me too
  • 9 replies
  • Problem
Photo of DF1LON
Slice Master 6000 - aggregation server not working
I had some trouble to get Slice Master running. I figured out that the software expects the additional components like CW skimmer in the ...
  • 1 me too
  • 2 replies
  • Problem
Photo of Jeff - G4IUA
WSJT-X connectivity issue
Running a 6500 (2.1.30.103 software) with WSJT-X (v1.8.0 r8193).  Intermittently WSJT-X loses connectivity, so clicking Settings/TestCA...
  • 1 me too
  • 3 replies
  • Problem
Photo of Bill English
Connection refused in DDUtil
DDUtil quit connecting I’ve read all the issues on the yahoo group, I’ve deleted Ddutil and reinstalled. I’ve ran the delete settings ba...
  • 1 me too
  • 2 replies
  • Problem
Photo of Ian VA3QT
6600/RMS Express Set-up Advice
I've been going around in a circle for over a week unsuccessfully trying to get RMS Express to talk to SmartSDR on a new FLEX 6600.  The ...
  • 1 me too
  • 5 replies
  • Problem
Photo of Trevor-EI2GLB
DAX IQ Judder
Hi I am having a problem with DAX IQ into CW skimmer, I get judder in the skimmer window, hard to describe what I mean so I have uploaded...
  • 1 me too
  • 8 replies
  • Problem
Photo of Alex - DH2ID
Flex-6500 relay clicking regularly and not holding frequency with SSDR 2.1.33
I've had an interesting problem here with my Flex-6500 after updating to 2.1.33. The update went without problems, I did a factory rese...
  • 1 me too
  • 6 replies
  • Problem
Photo of Thierry Lépine
New VAC 4.5 ! Fatal error
Happy new year to all, I was using VAC 4.15 with my Flex 5000A without any problem Yesterday, I tried the new VAC 4.5 and got a fatal er...
  • 1 me too
  • 11 replies
  • Problem
  • Solved
Photo of DK1KQ
Fldigi and DAX Error
In order installing Fldigi  (others like CW-Skimmer) I run into "DAX drive error". I followed until now all hints but without any result....
  • 1 me too
  • 1 reply
  • Problem
Photo of Dave - WB5NHL
Windows 10 update #1709
Three separate occurrences of the very large Windows 10 Creators update #1709 breaks the DAX drivers. One system running v1 SmartSDR and ...
  • 3 me toos
  • 15 replies
  • Problem
  • Solved
Photo of Travis Best
6700 & Pactor Modem
I have a P4 Pactor modem wired through the Accessory jack on the 6700 and have been unsuccessful at making a good pactor connection PTT, ...
  • 4 me toos
  • 17 replies
  • Problem
  • Acknowledged
Photo of Andrew Cowan
factory reset 6500
At the moment I have not been able to do a factory reset on my 6500 I have tried the power button for 5 sec but it always goes in to cali...
  • 1 me too
  • 6 replies
  • Problem
  • Not a Problem
Photo of Andrew Thall
SDR Bridge has stopped working.
Suddenly, SDR Bridge has stopped working.  It pops up and immediately crashes. (There is no opportunity to check settings.) CW Scanner al...
  • 1 me too
  • 6 replies
  • Problem
Photo of Dave Routzon Sr.
PowerSDR 2.8 and WSJT-X 1.8 setup. Won't transmit
I've got a 5000a and am running PowerSDR  2.8. I'm having trouble with WSJT-X 1.8 and transmit. Receive works fine, but there is no Flex ...
  • 1 me too
  • 3 replies
  • Problem
  • Solved