Remote attic setup question
Ok...I'm newbie...in several ways. First post here and only got my tech and general 8/25/19 and my extra on 9/14/19. Looking into a bas...
Dave - WB5NHL
Joined on August 4, 2013
67
Likes received
32
Conversations posted
257
Replies posted
181
Conversations followed
Conversations
Conversations 1 - 20 of 88
Install instructions for ERC Version 4 rotator controler
I know it's a long shot. But I picked one up second hand and the DVD was lost. I called Vibroplex and they said they didn't have any copi...
_large.jpg)
DAX vs 1903 update: Finding two missing drivers
I recently upgraded to Windows 10 version 1903. Of course, I forgot to uninstall the DAX drivers before the upgrade, so everything was m...
Problems after Windows update
I was getting a Windows Blue Screen because of "Page Fault in non Paged Area". I updated Windows as that fixed this same problem a few we...
Receiver in the 6700 and 6500 , are they the same ?
I've heard folks say the Receiver in the 6500 was the same as the 6700 minis the 4 slices of-course and I understand you can't do diversi...
Will new releases of Slice Master and DX Labs be compatible with 2.3.9?
Given the API changes will new releases of Slice Master and DX Labs still be compatible with SSDR 2.3.9? I hope the answer is yes as I u...
For FT-8 TX Settings
I have the 6500 and would like to know if there are preferred TX equalizer settings for FT-8? Should it even be turned on?
How do I setup N3FJP Contact Log with new Spots on Display Feature ??
How do I setup spot integration using N3JFP. N3JFP's Contest Log is
already linked to the flex and follows the bands and frequencies
...
Flex-6700 when using FT8 shifts freq on transmit
I have 6
slices open: 4 on FT8 on 3.57, 7.04, 14.07, and 21.07: One on PSK 14.08 and one
on 14.3 SSB.
FT8 works fine on 14.07. H...
FT8 decodes only every 30sec
I have a very strange problem with FT8. FT8 does a great job as long as I run only one instance of WSJT-X. As soon as I add more WSJT-X d...
FLEX-6500 with KPA-500 and KAT-500
Just built the KPA-500 and the KAT-500. I hooked the Antenna tuner up first and tested it, bypassed the internal antenna tuner in the FL...
mfj magnetic loop
hi,I was thinking of getting a mfj magnetic loop to go with my 6500,as im restricted with what I can put up at my qth,was wondering if an...
Best Network Switch(es) For Use With FlexRadio?
What do I need to look for to select an adequate network switch to use with FlexRadio products? The one that I bought a while ago kept dr...
looking for HF system installed in the air planes, the aim is allow air plane staff communicate main station from any place in the world
looking for HF system installed in the air planes, the aim is allow air plane staff communicate main station from any place in the world
trouble with flex controllers.
I have had 2 fail in the last 7 months 1st lasted 2 yrs 1 month 2nd lasted 5 months getting expensive.
Flex radio used in tropical conditions
I consider taking my Flex radio with me on my travel to Asia and operate from there. My concern is that the radio will be exposed to hars...
SmartCat Drops TCP Connections From WSJT-X
I recently set up WSJT-X V1.08 with CAT connections using TCP method. Initially WSJT-X has no trouble connecting and controlling my Flex....
FT8 spread
I've found two stations I tried to contact that responded with 'spread'. Okay, they're doing split ops. But there is no indication of the...
SMARTLINK...MINUMUM 1.5 mbps Uplink
"minimum upstream bandwidth of 1.5Mbps" Anybody checked hotels or Starbucks recently for 1.5Mbps uplink??? Ooops! No spec on latency???
How many "Flexers" working with youngsters for the amateur radio
A little off script, however a healthy amateur radio hobby and supporting industry really needs a younger demographic. In the latest ARRL...