Conversations
Conversations 1 - 20 of 26
Where in the transmitter is the source for the spectrum display? Is it the actual output on-the-air signal oris it taken from an earlier...
Win 10 or win 7?
New to the Flex system. Have recently ordered the 6600 and shipping is in the April timeframe. I'm getting ready by reading the forum to ...
COM PORTS
I use my 6300 with two different programs: DXLab Suite and N1MM Logger+. It seems when I assign a com port, either C or P type, to one ...
Are image attachments allowed here?
Are we allowed to attach .jpg images? I have a problem with fonts and an image would be worth a thousand words. Thanks. 73, Bill W6WRT
Can FlexControl adjust power?
My 6300 has been on the shelf for a while and I want to fire it up again. I see there is a new version of SSDR and I'm wondering if the a...
power genius front panel
Can't quite figure out what those green circle areas are on the front panel. Am I looking through vent holes and seeing something green i...
Can CWX transmit a steady carrier?
Is there a way to make CWX transmit a steady carrier? I want to tune up my amplifier and use the FlexControl to adjust the power while tu...
JT65 on 40M Newby Help
Need a quick Elmer for JT65. I have the fabulous and remarkableFlex 6500 operating just wonderfully on 20M with WSJT-X and JTAlertX (it...
Equipment enclosure
The 6000 series radios are so good remote that I'm considering relocating my radio and amp to a shed which is just 20 feet from my antenn...
How to enable "PC" on audio input menu?
When I open the audio input menu it shows MIC, ACC and PC, but PC also says "disabled" next to it. How do I enable it? I have tried many ...
A little more help on SSB .wav files please
OK, I got N1MM Logger+ to play the .wav files when I press F1 etc, and I hear the sound in the system speakers. The question is how do I ...
Best way to set up a voice recorder?
What is the best way to set up a voice recorder for calling CQ during contests? I have done extensive searches through the archives and G...
What advantage does Maestro have?
I see Maestro has become quite popular but I don't quite understand why, so I'm asking. I'm running a 6300 with a second monitor and I co...
WriteLog
I was looking at the WriteLog program, and as well as being a capable contest logging program, it also struck me that it would be useful ...
Interaction between RF Power slider nad TX Gain slider
I have a question about the interaction between the RF Power slider and the TX Gain slider, especially for the digital modes using DIGU a...
What Souncard or Rig Interface you use?
Fighting to RF, I am wondering if adding a Individual PCI Sound Card to PC o buy a Rig Interface would be improve my signal, lower noise ...
Beginning in RTTY
Hello everyone. This morning I was listening FT4JA in RTTY mode and I was delighted with the pile up. I opened the FLdigi, RTTY in the Fl...
Can the VFO operation be changed?
Currently the VFO makes the slice move back and forth over a stationary spectrum. Can this be reversed, i.e. can the slice remain station...
FLDIGI RTTY Flex 6300 TX w/no audio
I have FLDIGI working with fine my Flex 6300 on most digital modes. However, I cannot get it transmitting properly on RTTY. Decode is no...
Flex or a box with knobs?
Greetings,
I am new to the Flex community. I joined to get insight into the Flex and it's nuances. Being the age I am and knowing this...