Conversations

Conversations 1 - 20 of 111
Photo of W1RE
New WSJT-X (FT8) user unable to get audio showing or decode
Hi,I have not been too active lately but have finally found the time to try and get FT8 working here.I followed Rita's excellent "basic F...
  • 1 me too
  • 7 replies
  • Question
Photo of Lou
flex 6400 double rx
why is it not possible to open a double rx on the same frequency when the dual receiver is active on different frequency? the bandwith is...
  • 1 me too
  • 3 replies
  • Question
Photo of John-KC2QMA
Show Us Your FlexRadio In Your Shack
I thought it might be fun to have us Flex users show a picture of their FlexRadio in their shack. Here is my 6600M in my shack. It's i...
  • 8 me toos
  • 71 replies
  • Praise
Photo of Cedric HB9HFN
The best way to make FT8 contacts with Japan on 160m
My idea is to use the RIT with a value of 68000 Hz (1840 + 68 = 1908). Japan can transmit between 1807.5 and 1812.5 kHz. With the RIT you...
  • 1 me too
  • 2 replies
  • Question
Photo of Alex - DH2ID
Microsoft has stopped the 1809 update and warned not to install it manually
Quoting MS: "We have paused the rollout of the Windows 10 October 2018 Update (version 1809) for all users as we investigate isolated rep...
  • 1 me too
  • 7 replies
  • Question
Photo of Pat N6PAT
Gave 2.4.9 a second try but it failed
I gave 2.4.9 a second try but no good. Running 6700 with Windows 8.1 Monitoring very strong CW using 2.3.9 and the meter is hitting +2...
  • 1 me too
  • 2 replies
  • Problem
Photo of Rick, K7FYI
Flex Down! (6300 - Fan)
Just reporting in that I too am apparently having fan issues with my 6300. I've read up on the issue and know my options (i.e. Help Desk ...
  • 1 me too
  • 10 replies
  • Problem
  • In Progress
Photo of Gene - K3GC
Windows 10 Fall Update
For those who rush in where angels fear to tread :) Windows 10 fall update version 1809 17767.1 is available. Of course, as always it is...
  • 1 me too
  • 12 replies
  • Idea
Photo of Bob Craig, K8RC
Back to 2.3.9
My 6300 doesn't like 2.4.9:- DAX won't transmit. Audio in present into the radio (shows on mic audio level meter on the SSDR client) and ...
  • 1 me too
  • 6 replies
  • Problem
Photo of Gene - K3GC
2.4.9 spots
After upgrading to 2.4.9 spots became sporadic.  They would work for a while and then disappear.  I use spot collector in DXSuite. A rest...
  • 1 me too
  • 8 replies
  • Problem
Photo of Pat N6PAT
Anyone else seeing reduced receive after upgrade?
After upgrading my 6700 (using windows 8.1)  I experience a significant reduction in receiver performance. This is especially noticeable ...
  • 2 me toos
  • 4 replies
  • Question
Photo of VE3DZP
Function Keys
Would like to delete SPOTS with a function key not too much to ask, right?
  • 1 me too
  • 1 reply
  • Idea
Photo of Pat N6PAT
SSDR 2.4.9 DAX RX level issues
The DAX RX levels for 2.4.9 are causing problems with FT8 decoding. The slightest change causes decoding to stop. It's very inconsistent....
  • 1 me too
  • 2 replies
  • Problem
Photo of Pat N6PAT
FT8 Decoding and DAX RF Gain 2.4.9
Not sure if this is a problem or not.After upgrading to 2.4.9 (6700 Windows 8.1) WSJT-X stopped decoding FT8. I could see lots of signals...
  • 1 me too
  • 3 replies
  • Question
Photo of k4kzy
Flex Radio 6400
Three Blinks Of DeathIt's with deep regret and disappointment that I report the passing of Flex Radio# 3xx8-6xx9-6400-xx02 today at noon,...
  • 1 me too
  • 9 replies
  • Question
Photo of Pat N6PAT
High Cut indicator
This morning I had 3 slices open and noticed that Slice A had a fluctuating power output for FT8 on any band. I confirmed this with DDUti...
  • 1 me too
  • 1 reply
  • Idea
Photo of Barry J Cohen
Flex 6500 FT8 Will not key on 5357 FT8
FT8 works on all bands except will not key on 5357 like its out of band or inhibited but 5357 is in band and I moved the bandwidth down o...
  • 1 me too
  • 3 replies
  • Question
Photo of David Holmgren
Tokyo Hy-Power Amp Best Practice
Hello Fellow Flexers, While I save my shekels for the new FLEX amp I'm using my  old Tokyo Hy-Power 1.5 amp.  It's a great amp and I'm u...
  • 1 me too
  • 4 replies
  • Question
Photo of Pat N6PAT
Why is the SSDR RF meter so low?
Currently I run barefoot on 6 meters. I set the power to 100. The radio is putting out just a bit short of 100 watts which I confirmed wi...
  • 1 me too
  • 3 replies
  • Question
Photo of Al Dewey
Problem Recording WAV Files with Flex 6600M
I listed a similar question as a "Question" but received no response either here or on the N1MM Reflector so I will try it again listing ...
  • 1 me too
  • 7 replies
  • Problem