25749 1q6zpdf inline large

Third Party Applications and Products

Conversations

Recent Conversations
Conversations 1 - 15 of 799
Photo of Paul Lourd
Beginner remote operations with an amplifier - Get me started
I currently run my 6300 with an Ameritron ALS-600 and an LDG AT-600ProII tuner. I have three wire antennas on an Alpha Delta manual switc...
  • 1 me too
  • 10 replies
  • Question
Photo of Bernd DL9YAJ
Behringer CMD Micro and Flex 6400
Hi, i am a new 6400 owner. I am interested to use a Behringer CMD Micro console with my new Flex 6400. Last post i could found was from ...
  • 1 me too
  • 0 replies
  • Question
Photo of Michael Walker
A cost effective Web Relay control
I wanted to share a 4 port cost effective Web Relay Switch.  This is a subset of the one I use on my remote base (I use 16 relays).  Whil...
  • 4 me toos
  • 14 replies
  • Idea
Photo of W2PP
I lose comm with Antenna Genius during transmission
I have the 8x2 antenna Genius mounted on the tower in a NEMA enclosure.  When I transmit with 100 watts all is fine.  When I transmit eve...
  • 1 me too
  • 3 replies
  • Problem
Photo of Dudley - WA5QPZ
Announcement - Replay of today's Flex Net, September 16, 2018, now available
Replay of today's Flex Net is now available on YouTube or use this direct link. https://youtu.be/hIaAjgb5BoY This net meets each Sunday ...
  • 2 me toos
  • 0 replies
  • Idea
Photo of Gregory Stobbs
WSJT-X not decoding. I am seeing signals in the WSJT-X waterfall; clock seems accurate
WSJT-X not decoding. I am seeing signals in the WSJT-X waterfall; I can send CQ and getting RF out; the clock seems to be within 0.2 secs...
  • 3 me toos
  • 13 replies
  • Question
Photo of Dudley - WA5QPZ
Announcement - Replay of today's FlexNet , September 9, 2018 available on YouTube channel, WA5QPZ
In case you missed today's net ,  here is a replay available at https://youtu.be/ykhiOGb2j4c Remember it's every Sunday at 1 PM Central ...
  • 1 me too
  • 0 replies
  • Idea
Photo of Dave Gipson
CWSkimmer and 6600M setup
I have the following software and equipment:Dedicated WIN-7 DesktopFlex-6600MSmartSDR 2.3.9.112SMartSDR CAT serial port 4 & TCP port 5002...
  • 2 me toos
  • 5 replies
  • Question
Photo of Dennis Daniel KM6DF
Need SmartLink Status Please
Please update us on Smartlink per Microsoft Azure system is up and running with no issues posted. is there anything we need to do to rest...
  • 1 me too
  • 7 replies
  • Problem
Photo of peter kulik
Slicemaster 6000 Internal Error Traceback
I'm using SmartSDR 2.3.9 with Slice Master 6000 0.10.5e.  Been working great then out of the blue Slice Master is failing to connect with...
  • 1 me too
  • 3 replies
  • Problem
Photo of Dudley - WA5QPZ
Announcement - Sunday afternoon Flex Net, 1 PM Central/ 2PM Eastern on 14.329 MHz
20 meters is awfully quiet right now,  low noise .   Check in if you have the time..  73, Dudley
  • 2 me toos
  • 6 replies
  • Idea
Photo of Dudley - WA5QPZ
Announcement - Replay of today's Flex Net , 9/2/2018
Replay of today's Flex Net,  with Gary ,  W2CEA as net control,  is on YouTube, https://youtu.be/YffREPilLFo Besure to change your video...
  • 1 me too
  • 0 replies
  • Idea
Photo of Andrew - G0RVM
Slicemaster v0.10.5d Launch tab empty
I've installed Slicemaster and it seems to run ok (it doesn't report errors and seems to connect to a specified cluster server ok), but t...
  • 1 me too
  • 9 replies
  • Problem
Photo of Terry Ashland
Interfacing Ameritron RCS-4 with SainSmart 8 USB Relay Board
I have just purchased a SainSmart 8 USB relay board and have it working wonderfully with SSDR 1.10.16.  However, I would like a little he...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Dana Borgman
Incomplete DAX driver installation
About 3 months ago I opened a conversation about trouble I was having with WSJT-X.  The problem was that the audio dropdown only showed t...
  • 1 me too
  • 6 replies
  • Problem