Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Meastro and Mic in at Radio

k3Tim
k3Tim Member ✭✭✭
edited May 2020 in Maestro

How does one use the 6K front panel mic with the Maestro. 

After a long hike to a mountain peak and setting up the Maestro and 6500 I was all set for some 20 meter SSB. The kit included only the foster mic and I couldn't figure out how to activate this mic input.  I was using the Maestro speaker but thought that routing setting was only for receive sound. Should I have set the sound from the radio and then the speaker / mic would be 'hot' in the radio.

_..--
k3TiM

Answers

  • philip.theis
    philip.theis Member ✭✭
    edited May 2016
    While the radio is in SSB mode, push the TX MENU button (Mic/PWR knob) and select R-MIC on the left hand side. The R- selections are on the Radio
    GL, Phil
  • k3Tim
    k3Tim Member ✭✭✭
    edited May 2020
    Thanks Phil - much appreciated...

    Best Regards,

    k3TiM

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.