Display Clean Transmit Waveform

JohnT

It would be a great feature to include an option in the Transmit menu, so that one could select to enable the clean transmit spectrum/waterfall to replace the “ raw or dirty” one during transmit.  Not having to place 2 spectrum and waterfall screens at the same time., thus loosing the vertical resolutions where the 4 screens are squashed, especially with the M models!

I am referring to the following procedure:

https://www.youtube.com/watch?v=2sY2Qdp8reM

The majority of the time I am using my 8600M rig all by itself, using the built-in FreeDV waveform, and not any additional software.

John N2KBE

Trucker

I think that the problem would be where Flex Radio taps the signal chain for the transmit display. Currently, it is before the physical PA filters. I believe it would require a hardware change to implement it in this case. I doubt that there is any other way to do it besides the method in Mike's video without making a hardware redesign to accommodate it. The Anan radios have this feature. But, it is a physical hardware implementation tapping the signal after the hardware filters.

James

WD5GWY